Search results

The purpose of this paper is to use the corresponding magnetic sensor and detection method to detect and image the defects of small diameter pipelines. Urban gas pipeline is an energy transportation tool for urban industrial production and social life, which is closely related to urban safety. Preventing the occurrence of urban gas pipeline transportation accidents and carrying out pipeline defect detection are of great significance for the urban economic and social stability. To perform pipeline defect detection, the magnetic flux leakage internal detection method is generally used in the detection of large-diameter long-distance oil and gas pipelines. However, in terms of the internal detection of small-diameter pipelines, due to the heavy weight, large structure of the detection device and small pipe diameter, the detection is more difficult.

In order to solve the above matters, self-made three-dimensional magnetic sensor and three-dimensional magnetic flux leakage imaging direct method are proposed for studying the defect identification. Firstly, for adapting to the diameter range of small-diameter pipelines, and containing the complete information of the defect, a self-made three-dimensional magnetic sensor is made in this paper to improve the accuracy of magnetic flux leakage detection. And on the basis of it, a small diameter pipeline defect detection system is built. Secondly, as detection signal may be affected by background magnetic field interference and the jitter interference, the complete ensemble empirical mode decomposition with adaptive noise method is utilized to screen the detected signal. As a result, the useful signal is reconstructed and the interference signal is removed. Finally, the defect contour inversion imaging of detection is realized based on the direct method of three-dimensional magnetic flux leakage imaging, which includes three-dimensional magnetic flux leakage detection data and data segmentation recognition.

The three-dimensional magnetic flux leakage imaging experimental results shown that, compared to the actual defects, the typical defects, irregular defects and crack groove defects can be analyzed by the magnetic flux leakage defect contour imaging method in qualitative and quantitative way respectively, which provides a new idea for the research of defect recognition.

A three-dimensional magnetic sensor is made to adapt the diameter range of small diameter pipeline, and based on it, a small-diameter pipeline defect detection system is built to collect and display the magnetic flux leakage signal.

This study aims to evaluate the thermal performance of phase change materials (PCMs) microcapsules (MCs) attached using SiO₂ microspheres and investigate the thermal regulation effect on the coated denim fabric.

The PCM microcapsule was prepared by in situ polymerization using a mixture of solid paraffin and butyl stearate as core material (CM) and methyl methacrylate as a monomer. The SiO₂ microparticles were attached to the outer layer of the membrane to enhance the thermal performance of MCs. The morphology, chemical structure, latent heat storage and thermal resistance of MCs were characterized. PCM MCs were coated on the denim fabric and thermo-gravimetric analysis was conducted; thermal insulation and thermal infrared imaging performance of the coated fabrics were also investigated.

The diameters of SiO₂ particles and PCMs MCs were 300-500 nm and 1 μm, respectively. SiO₂ was wrapped on single-wall PCMs MCs with the mass ratio of 1:5. With the addition of SiO₂, the phase transition temperature range of MCs increased from 34°C to 39°C, and the endothermic and exothermic latent heat decreased by 5.35 J/g and 10.07 J/g, respectively. The degradation rate of MCs was significantly slowed down at high temperature. The denim fabric coated with MCs revealed thermal regulation property. After absorbing heat, the MCs slowed down the rate of heat loss and extended the heat release time.

The phase transition temperature of the composite CM was wide, and the latent heat storage was reduced. The addition of SiO₂ particles can significantly slow down the rate of heat loss, but it further reduces the latent heat storage performance.

The method developed provided a simple and practical solution to improve the thermal regulation performance of fabrics.

The method of adjusting the phase transition temperature range of the composite CM is novel and many applications could be found in preparation of PCMs and thermal management.