Search results

The density peak clustering algorithm (DP) is proposed to identify cluster centers by two parameters, i.e. ρ value (local density) and δ value (the distance between a point and another point with a higher ρ value). According to the center-identifying principle of the DP, the potential cluster centers should have a higher ρ value and a higher δ value than other points. However, this principle may limit the DP from identifying some categories with multi-centers or the centers in lower-density regions. In addition, the improper assignment strategy of the DP could cause a wrong assignment result for the non-center points. This paper aims to address the aforementioned issues and improve the clustering performance of the DP.

First, to identify as many potential cluster centers as possible, the authors construct a point-domain by introducing the pinhole imaging strategy to extend the searching range of the potential cluster centers. Second, they design different novel calculation methods for calculating the domain distance, point-domain density and domain similarity. Third, they adopt domain similarity to achieve the domain merging process and optimize the final clustering results.

The experimental results on analyzing 12 synthetic data sets and 12 real-world data sets show that two-stage density peak clustering based on multi-strategy optimization (TMsDP) outperforms the DP and other state-of-the-art algorithms.

The authors propose a novel DP-based clustering method, i.e. TMsDP, and transform the relationship between points into that between domains to ultimately further optimize the clustering performance of the DP.

Through the case analysis of China’s digital library, the purpose of this paper is to make readers understand the development status, achievements and problems of China’s digital library. At the same time, it also enables readers to understand the common application forms of these modern information technologies in digital libraries, so as to provide a reference basis for the application of new technologies in other countries’ digital libraries.

On the basis of literature review, the authors have analyzed a conspicuous collection of related papers in order to make a comprehensive summary and elaboration on the present situation of modern information technology application in Chinese digital libraries.

This paper defines and analyses the concepts, contents and relationships of the three most important modern Big Data information technologies, and then completes the analysis of the current situation of the application of information technology in Chinese digital libraries. The block chain can achieve more accurate information collection, more secure information storage and more effective information dissemination. Artificial intelligence can improve the existing digital library service level in three aspects: resource construction, information organization and information service. Internet plus will help transform the traditional digital library business mode in order to adapt to the change of user-centered service.

This is among the first structured attempts of comprehensively and generally summarizing the application of modern information technology in Chinese digital libraries. It also contains an original exploration of the relationship between the main kinds of modern information technology. Based on this, a relatively complete application scenario and possible vision of modern information technology in digital library can be built.

N-containing heterocyclic benzotriazole derivatives as new corrosion inhibitor for mild steel contained in emulsion were synthesized, and their inhibition behaviors for mild steel (MS) contained in emulsion were investigated by experiments and theoretical calculations, and this study aims to prove that two new inhibitors have excellent inhibition efficiency for steel corrosion.

2-(1H-benzo[d][1,2,3]triazol-1-yl)-N,N-dioctylacetamide (BTN) and O-(3-(1H-benzo[d] [1,2,3]triazol-1-yl)propyl) S-(2-(dioctylamino)-2-oxoethyl) carbonodithioate (BTSC) as a new corrosion inhibitor were synthesized, and their inhibition behaviors for MS contained in emulsion were investigated by gravimetric experiment, electrochemical tests and theoretical calculations.

Results of gravimetric experiment, electrochemical tests show that BTSC exhibit excellent inhibition performance, and it has a higher inhibition efficiency of 96.6% than that BTN. The resultant adsorption films from BTN/BTSC adsorbed on MS, effectively inhibiting the corrosion of MS is mainly through chemisorption and follow to Langmuir’s adsorption isotherm.

Experimental and theoretical calculations display that two new synthesized inhibitors are excellent corrosion inhibitor for MS contained in emulsion. Electrons of inhibitors mainly focus on the C, N, S and O atoms, which demonstrate these atoms are the centers of negative charge, and they supply electrons to Fe atoms through coordination bonds.

Remanufacturing of worn blades with various defects normally requires processes such as scanning, regenerating a geometrical reference model, additive manufacturing (AM) through laser cladding, adaptive machining and polishing and quality inspection. Unlike the manufacturing process of a new part, the most difficult problem for remanufacturing such a complex surface part is that the reference model adaptive to the worn part is no longer available or useful. The worn parts may suffer from geometrical deformation, distortion and other defects because of the effects of harsh operating conditions, thereby making their original computer aided design (CAD) models inadequate for the repair process. This paper aims to regenerate the geometric models for the worn parts, which is a key issue for implementing AM to build up the parts and adaptive machining to reform the parts. Unlike straight blades with similar cross sections, the tip geometry of the worn tip of a twist blade needs to be regenerated by a different method.

This paper proposes a surface extension algorithm for the reconstruction of a twist blade tip through the extremum parameterization of a B-spline basis function. Based on the cross sections of the scanned worn blade model, the given control points and knot vectors are firstly reconstructed into a B-spline curve D. After the extremum of each control point is calculated by extremum parameterization of a B-spline basis function, the unknown control points are calculated by substituting the extremum into the curve D. Once all control points are determined, the B-spline surface of the worn blade tip can be regenerated. Finally, the extension algorithm is implemented and validated with several examples.

The proposed algorithm was implemented and verified through the exampled blades. Through the extension algorithm, the tip geometry of the worn tip of a twist blade can be regenerated. This method solved a key problem for the repair of a twist blade tip. It provides an appropriate reference model for repairing worn blade tips through AM to build up the blade tip and adaptive machining/polishing processes to reform the blade geometry.

The extension errors for different repair models are compared and analyzed. The authors found that there are several factors affecting the accuracy of the regenerated model. When the cross-section interval and the extension length are set properly, the restoration accuracy for the blade tip can be improved, which is acceptable for the repairing.

The lack of a reference geometric model for worn blades is a significant problem when implementing blade repair through AM and adaptive machining processes. Because the geometric reference model is unavailable for the repair process, reconstruction of the geometry of a worn blade tip is the first crucial step. The authors proposed a surface extension algorithm for the reconstruction of a twist blade tip. Through the implementation of the proposed algorithm, the blade tip model can be regenerated.

Remanufacturing of worn blades with various defects is highly demeaned for the aerospace enterprises considering sustainable development. Unlike straight blades, repair of twist blades encountered a very difficult problem because the geometric reference model is unavailable for the repair processes. This paper proposed a different method to generate the reference model for the repair of a twist blade tip. With this model, repair of twist blades can be implemented through AM to build up the blade tip and adaptive machining to subtract the extra material.

The authors proposed a surface extension algorithm to reconstruct the geometric model for repair of twist blades.

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.

The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.

The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.

A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.

Service providers on highly competitive online outsourcing platforms employ various signals to entice buyers to make online purchases. One such signal—the solution exemplars—attracts attention through depictions of exemplary prior work completed by the service providers. Unfortunately, it is not known the extent to which solution exemplar characteristics affect sales performance nor is it clear how such signals perform in the presence of complementary signals such as service provider expertise. This paper explores these issues.

Extending signaling theory, the authors develop a model to explore the effects of solution exemplar characteristics (i.e. exemplar quantity, exemplar diversity and exemplar popularity) on sales performance under the moderating impact of service provider expertise. The authors test the model using proprietary data from ZBJ.com, a leading online outsourcing platform in China.

Exemplar quantity and exemplar popularity positively affect sales performance; exemplar diversity has no significant impact on sales performance and service provider expertise positively moderates the relationships between exemplar quantity, exemplar popularity and sales performance.

This work makes several significant contributions. First, the authors enrich the research on signals in online outsourcing by exploring the impact of solution exemplar characteristics on sales performance. Second, the authors analyze three solution exemplar characteristics: exemplar quantity, exemplar diversity and exemplar popularity. Third, this work shows that service provider expertise moderates the relationship between solution exemplar characteristics and sales performance. Important practical implications for both online outsourcing platforms and service providers are discussed.

The Dr You Bao Shao Overseas Chinese Documentation and Research Center at Ohio University Libraries was established in 1993. Since its establishment, the center has been actively promoting worldwide institutional cooperation through conferences and joint meetings, including this First International Conference of Institutes and Libraries for Overseas Chinese Studies. The conference drew the attention of academic centers, research institutes, library collections, academic societies, university programs, and museums and brought together over 150 scholars, researchers, teachers, archivists, librarians, curators, and community activists worldwide. It includes four plenary sessions: locating, collecting, preserving, and sharing resources; cooperation of overseas Chinese research projects; digitizing and sharing resources on overseas Chinese; and publication and organization with established programs, curriculums, professional activities, and academic studies on overseas Chinese studies.

The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment. Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni₃Sn₄ phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn₄ phase. After the reflow process and thermal aging of different joints, the growth behavior of interfacial layer was different due to the different mechanism of element diffusion of the two substrates. The PC Ni substrate mainly provided Ni atoms through grain boundary diffusion. The Ni₃Sn₄ phase of the Sn0.05Ni/PC Ni joint was finer, and the diffusion flux of Sn and Ni elements increased, so the Ni₃Sn₄ layer of this joint was the thickest. The SC Ni substrate mainly provided Ni atoms through the lattice diffusion. The Sn0.1Ni/SC Ni joint increases the number of Ni atoms at the interface due to the doping of 0.1Ni (wt.%) elements, so the joint had the thickest NiSn₄ layer.

The effects of doping minor Ni on the microstructure evolution of an Sn-xNi (x = 0, 0.05 and 0.1 Wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment was investigated in this study.

Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni₃Sn₄ phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn₄ phase. After the reflow process and thermal aging of different joints, the growth behavior of the interfacial layer was different due to the different mechanisms of element diffusion of the two substrates.

In this study, the effect of doping Ni on the growth and formation mechanism of IMCs of the Sn-xNi/Ni (single-crystal) solder joints (x = 0, 0.05 and 0.1 Wt.%) was investigated.

The purpose of this paper is to provide the historical background of genealogical records and analyze the value of Chinese genealogical research through the study of names and genealogical resources.

The paper examines the historical evolution and value of Chinese genealogical records, with the focus on researching the Islamic Chinese names used by the people living in Guilin. The highlight of this paper includes the analysis and evolution of the Islamic Chinese names commonly adopted by the local people in Guilin. It concludes with the recommendations on emphasizing and making the best use of genealogical records to enhance the research value of Chinese overseas studies.

The paper covers the history of Islam and describes how the religion was introduced into China, as well as Muslims' ethnicity and identity. It also places focus on the importance of building a research collection in Asian history and Chinese genealogy.

This research study has a strong subject focus on Chinese genealogy, Asian history, and Islamic Chinese surnames. It is a narrow field that few researchers have delved into.

The results of this study will assist students, researchers, and the general public in tracing the origin of their surnames and developing their interest in the social and historical value of Chinese local history and genealogies.

The study of Chinese surnames is, by itself, a particular field for researching the social and political implications of contemporary Chinese society during the time the family members lived.

Very little research has been done in the area of Chinese local history and genealogy. The paper would be of value to researchers such as historians, sociologists, ethnologists and archaeologists, as well as students and anyone interested in researching a surname origin, its history and evolution.

The purpose of this paper is to provide a guiding framework for studying the travel patterns of PT users. The combination of public transit (PT) users’ travel data and user profiling (UP) technology to draw a portrait of PT users can effectively understand users’ travel patterns, which is important to help optimize the scheduling of PT operations and planning of the network.

To achieve the purpose, the paper presents a three-level classification method to construct the labeling framework. A station area attribute mining method based on the term frequency-inverse document frequency weighting algorithm is proposed to determine the point of interest attributes of user travel stations, and the spatial correlation patterns of user travel stations are calculated by Moran’s Index. User travel feature labels are extracted from travel data containing Beijing PT data for one consecutive week.

In this paper, a universal PT user labeling system is obtained and some related methods are conducted including four categories of user-preferred travel area patterns mining and a station area attribute mining method. In the application of the Beijing case, a precise exploration of the spatiotemporal characteristics of PT users is conducted, resulting in the final Beijing PTUP system.

This paper combines UP technology with big data analysis techniques to study the travel patterns of PT users. A user profile label framework is constructed, and data visualization, statistical analysis and K-means clustering are applied to extract specific labels instructed by this system framework. Through these analytical processes, the user labeling system is improved, and its applicability is validated through the analysis of a Beijing PT case.