Search results

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.

Although the tasks of managing carbon peaks and achieving carbon neutrality in China are arduous, they are also of great significance, which highlights China’s determination and courage in dealing with climate change. The power industry is not only a major source of carbon emissions but also an important area for carbon emission reduction. Thus, against the backdrop of carbon neutrality, understanding the development status of China’s power industry guided by the carbon neutrality background is important because it largely determines the completeness of China’s carbon reduction promises to the world. This study aims to review China’s achievements in carbon reduction in the electric industry, its causes and future policy highlights.

The methods used in this study include descriptive analyses based on official statistics, government documents and reports.

The research results show that, after years of development, the power industry has achieved positive results in low-carbon provisions and in the electrification of consumption, and carbon emission intensity has continued to decline. Policy initiatives play a key role in this process, including, but not limited to, technology innovations, low-carbon power replacement and supported policies for low-carbon transformation toward low-carbon economies.

This study provides a full picture of China’s power industry against the backdrop of low-carbon development, which could be used as a benchmark for other countries engaging in the same processes. Moreover, a careful review of China’s development status may offer profound implications for policymaking both for China and for other governments across the globe.

In this study, an eco-friendly cotton fabric (CF) treatment method was proposed to induce anti-ultraviolet and flame retardant properties, and a new application of tannic acid (TA) and phytic acid (PA) in ultraviolet protection and flame retardant fabric was put forward.

By combining diethylenetriamine, PA and TA on CF, a chemical reaction intumescent flame retardant CF with anti-ultraviolet and anti-flame retardance was developed.

The flame retardant and ultraviolet resistance of CF were characterized by LOI, vertical combustion, cone calorimetry and ultraviolet resistance testing. SEM, XPS, FTIR and other tests were used to analyze the chemical composition, surface morphology and residual carbon after combustion of the CF, and it was confirmed that the modified CF has good ultraviolet resistance and flame retardant performance.

In this study, an eco-friendly CF treatment method was proposed to induce anti-ultraviolet and flame retardant properties, and a new application of TA and PA in ultraviolet protection and flame retardant fabric was put forward.

This review aims to give an overview about zinc oxide (ZnO) based gas sensors and the role of doping in enhancing the gas sensing properties. Gas sensors based on ZnO thin film are preferred for sensing applications because of their modifiable surface morphology, very large surface-to-volume ratio and superior stability due to better crystallinity. The gas detection mechanism involves surface reaction, in which the adsorption of gas molecules on the ZnO thin film affects its conductivity and reduces its electrical properties. One way to enhance the gas sensing properties is by doping ZnO with other elements. A few of the common and previously used dopants include tin (Sn), nickel (Ni) and gallium (Ga).

In this brief review, previous works on doped-ZnO formaldehyde sensing devices are presented and discussed.

Most devices provided good sensing performance with low detection limits. The reported operating temperatures were within the range of 200̊C –400̊C. The performance of the gas sensors can be improved by modifying their nanostructures and/or adding dopants.

As of yet, a specific review on formaldehyde gas sensors based on ZnO metal semiconductors has not been done.