Search results

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

With high-speed urbanization and strict requirements on energy conservation and environmental protection, eco-city has become the priority of urban development in China. Governments of all levels promote various eco-city planning schemes within a short term, but most schemes are characterized by randomness and subjectivity. To solve the lack of scientific pre-implementation evaluation for eco-city planning and improve eco-city construction quality, a systematic analysis is conducted in this study from three dimensions, namely, eco-city planning scheme, operating mechanism, and guarantee measures. A 3D evaluation model for eco-city planning is constructed through index selection. Schemes are ranked comprehensively with the distance measure method, and projection analysis is performed with the four-grid evaluation screen. Finally, the 3D evaluation model is applied to evaluate eco-city planning for Shenzhen, Chongqing, and Weifang. Results show that the model can be used to evaluate eco-city planning schemes effectively and comprehensively and offers targeted optimization suggestions in accordance with the evaluation results. Construction of the 3D evaluation model of eco-city planning based on the distance measure to determine the reasonability of eco-city planning reduces the institutional and social costs of eco-city planning practices.

This study aims to answer two questions: (a) what obstacles and opportunities do Chinese female entrepreneurs face when doing business? And (b) how do they negotiate their entrepreneurial careers and gender identities in different gender-segregated markets?

This study uses qualitative research methods of participant observation and in-depth interviews with 41 female entrepreneurs in China and the theoretical lenses of gender role theory and doing gender in entrepreneurship.

The study findings reveal that Chinese female entrepreneurs face different obstacles and opportunities in gender-segregated industries. Their experiences vary in industries that are mainly occupied by males and females. On the one hand, women in female-dominated industries may be supported by a feminine working environment that is coherent with their domestic roles. However, they may also be questioned on the cultural impurity implied in some industries, which harms their class-based feminine virtue. On the other hand, women in male-dominated industries may be challenged and marginalized due to their gender. However, some find ways to turn the disadvantaged feminine characters into favourable conditions and break out of the stereotypical gender constraints in doing business.

This study contributes to the literature on gender and entrepreneurship in general. More specifically, it contributes to the study of doing gender in gender-segregated markets, and it also illustrates women’s gendered opportunities and constraints in Chinese society that are affected by the long-lasting traditional gender norms.

During the production process of steel strip, some defects may appear on the surface, that is, traditional manual inspection could not meet the requirements of low-cost and high-efficiency production. The purpose of this paper is to propose a method of feature selection based on filter methods combined with hidden Bayesian classifier for improving the efficiency of defect recognition and reduce the complexity of calculation. The method can select the optimal hybrid model for realizing the accurate classification of steel strip surface defects.

A large image feature set was initially obtained based on the discrete wavelet transform feature extraction method. Three feature selection methods (including correlation-based feature selection, consistency subset evaluator [CSE] and information gain) were then used to optimize the feature space. Parameters for the feature selection methods were based on the classification accuracy results of hidden Naive Bayes (HNB) algorithm. The selected feature subset was then applied to the traditional NB classifier and leading extended NB classifiers.

The experimental results demonstrated that the HNB model combined with feature selection approaches has better classification performance than other models of defect recognition. Among the results of this study, the proposed hybrid model of CSE + HNB is the most robust and effective and of highest classification accuracy in identifying the optimal subset of the surface defect database.

The main contribution of this paper is the development of a hybrid model combining feature selection and multi-class classification algorithms for steel strip surface inspection. The proposed hybrid model is primarily robust and effective for steel strip surface inspection.

Majority of the existing direct slicing methods have generated precise slicing contours from different surface representations, they do not carry any interior information. Whereas, heterogeneous solids are highly preferable for designing and manufacturing sophisticated models. To directly slice heterogeneous solids for additive manufacturing (AM), this study aims to present an algorithm using octree-based subdivision and trivariate T-splines.

This paper presents a direct slicing algorithm for heterogeneous solids using T-splines, which can be applied to AM based on the fused deposition modeling (FDM) technology. First, trivariate T-splines are constructed using a harmonic field with the gradient direction aligning with the slicing direction. An octree-based subdivision algorithm is then used to directly generate the sliced layers with heterogeneous materials. For FDM-based AM applications, the heterogeneous materials of each sliced layer are discretized into a finite number of partitions. Finally, boundary contours of each separated partition are extracted and paired according to the rules of CuraEngine to generate the scan path for FDM machines equipped with multi-nozzles.

The experimental results demonstrate that the proposed algorithm is effective and reliable, especially for solid objects with multiple materials, which could maintain the model integrity throughout the process from the original representation to the final product in AM.

Directly slicing heterogeneous solid using trivariate T-splines will be a powerful supplement to current technologies in AM.

The purpose of this study is to investigate the influence of additive particle size on the anti-corrosion behaviors of polyurethane (PU) coating.

The graphite (Gr) and poly-graphite (PGr) were used as large size additive and small size additive, respectively. The immersion test and electrochemical test were used to study the corrosion behaviors.

In the immersion test, the surface of the bare steel sample was corroded uniformly. However, for the steel samples with coatings, the surfaces were corroded locally. This phenomenon showed that the coating can isolate artificial sea-water and samples and then decreased the corrosion rate. Furthermore, the most severe corrosion was observed on the sample with the Gr/PU coating compared with other anti-corrosion coatings. The results of the electrochemical measurements indicated that the corrosion rate of the sample with PGr/PU coating was approximately two times lower than that of the sample with the Gr/PU coating and the sample with PGr/PU coating was hardest to be corroded.

To have a more objective and direct recognition of the particle size effect on the coating quality.

Analyses the evolution of China’s telephone and cable systems, in terms of the public interest, discussing current bureaucratic conflicts and policy debates over convergence, and construction of an independent broadband cable network. Looks in depth at China’s problems and the different problems for its citizens with regard to poverty levels and access to the Web.

This study aims to develop a customer-centric model based on an online customer experience (OCE) construct relating to e-loyalty, e-trust and e-satisfaction, resulting in improved Net Promoter Score for Indian digital banks.

This study used an online survey method to gather data from a sample of 485 digital banking users, from which usable questionnaires were obtained. The obtained data were subjected to thorough analysis using partial least squares structural equation modelling to further investigate the research hypotheses.

The main factors determining digital banks’ OCE were perceived customer centrality, perceived value and perceived usability. Additionally, relevant constructs were evaluated using importance-performance map analysis.

This study used convenience sampling for the urban population using digital banking services; therefore, the outcome may be generalized to a limited extent. To further strengthen digital banking, it would be valuable to imitate studies in other countries.

There is a lack of research on digital banking and OCE in India; thus, this study will help rectify this issue while providing valuable insights. This study differs from others in that it examines the connections between online customer satisfaction, loyalty, trust and the bottom line of financial institutions using these factors as dependent variables instead of traditional measures.