Search results

Modular integrated construction (MiC) is an innovative and effective manufacturing-based method of construction that has become the mainstream development direction of projects in Hong Kong (HK). However, large-scale promotion of MiC practice still needs efforts. A pressing concern is that the impact of relevant policies on stakeholders during project implementation is rarely explored in depth. Therefore, to fill the research gap, this study aims to investigate the influence of policies on stakeholders to drive the successful implementation of MiC in HK.

This study uses a strategy of multiple methods. First, a comprehensively literature review and survey were adopted to identify critical policies and stakeholders. Second, semi-structured interviews with 28 experts were conducted to quantify their relationships. Third, three policy–stakeholder networks at initiation, planning and design and construction stages were established using social network analysis.

Environmental protection policy, COVID-19 pandemic policy and environmental protection policy and quality acceptance standard for project completion are found to be the most important policies of the three stages, respectively. The HK government and developers are highlighted as prominent stakeholders influencing policy implementation at all three stages. The dynamics of the influence stakeholders receive from critical policies at different stages of MiC are discussed. Valuable recommendations are accordingly proposed to enhance the successful implementation of MiC projects from the perspective of various stakeholders.

This study contributes to the body of knowledge by considering the mediating influence of stakeholders during policy implementation in the MiC uptake, and is valuable in helping policymakers to deeply understand the influence of policies to further forward successful MiC implementation and practicality in HK.

Multifilamentary Bi₂Sr₂CaCu₂O_x (Bi2212) superconductor composite wires are the only high-temperature superconducting round wires (RW) with sufficient critical current density (J_c) for superconducting magnets generating magnetic fields greater than 25 Tesla. Very complex microstructures of Bi2212 RWs including the voids or gas bubbles, filament to filament bridges and wire architecture strongly influence their electrical behavior. Especially, a large number of voids in Bi2212 superconducting filaments is believed to be the major current-limiting mechanism. However, the effect of the void structure on the Jc is not well understood yet.

In this paper, the authors first statistically analyzed the size and distribution of voids in filaments using the reported microscopic data, obtaining the essential statistical regularities. An electrical model was further developed to predict the J_c of multifilamentary wires while taking into account of the current limiting mechanisms of the void structure in filaments, and the current sharing roles of filament to filament bridges.

The model predicts the quantitative dependence of J_c on the number of Bi2212 filaments in each bundle of a double-restack wire and porosity. The results are useful optimizing design and fabrication of Bi2212 multifilamentary wires.

For the complex structure of voids and interfilamentary bridges inside Bi2212 multifilamentary superconducting wires, the authors took a statistical characterization and studied its effect on the critical current density Jc (the key index of evaluating the current carrying capacity).

This paper presents a generic simulation model to determine the equipment mix (quay, yard and intra-terminal transfer) for a Container Terminal Logistics Operations System (CTLOS). The simulation model for the CTLOS, a typical type of discrete event dynamic system (DEDS), consists of three sub-models: ship queue, loading-unloading operations and yard-gate operations. The simulation model is empirically applied to phase 1 of the Yangshan Deep Water Port in Shanghai. This study considers different scenarios in terms of container throughput levels, equipment utilization rates, and operational bottlenecks, and presents a sensitivity analysis to evaluate and choose reasonable equipment ratio ranges under different operational conditions.

This paper aims to study the corrosion inhibition behavior of imidazopyridine and its three derivatives on brass.

The authors performed weight loss experiments, electrochemical experiments including the polarization curve and electrochemical impedance spectrum, corrosion morphology observation using scanning electron microscope (SEM) and atomic force microscope (AFM) and surface composition analysis via X-ray photoelectron spectroscopy (XPS) to analyze the corrosion inhibition behavior of imidazopyridine and its three derivatives on brass by using quantum chemical calculation (Gaussian 09), molecular dynamics simulation (M-S) and Langmuir adsorption isotherm.

According to the results, imidazole-pyridine and its derivatives were found to be modest or moderately mixed corrosion inhibitors; moreover, they were spontaneously adsorbed on the metal surface in a single-layer, mixed adsorption mode.

The corrosion inhibition properties of pyrazolo-[1,2-a]pyridine and its derivatives on brass in sulfuric acid solution were analyzed through weight loss and electrochemical experiments. Moreover, SEM and AFM were simultaneously used to observe the corrosion appearance. Furthermore, XPS was used to analyze the surface. Then, Gaussian 09 and M-S were combined along with the Langmuir adsorption isotherm to investigate the corrosion inhibition mechanism of imidazole-[1,2-a]pyridine and its derivatives.

This study examines the impact of university science parks’ (USPs) capabilities on revenue generation and introduces regional innovation as a moderating variable. This study aims to provide insights into enhancing revenue generation and fully leveraging the role of USPs in promoting revenue generation.

This study employs system generalized method of moments (GMM) estimation for 116 universities in China from 2008 to 2020, using hierarchical regression analysis to examine the relationships between variables.

The findings suggest that USPs play a beneficial role in fostering revenue generation. Specifically, the provision of incubation funding demonstrates a positive correlation, while USPs size exhibits an inverted U-shaped pattern, with a threshold at 3.037 and a mean value of 3.712, highlighting the prevalent issue of suboptimal personnel allocation in the majority of USPs. Moreover, the analysis underscores the critical moderating influence of regional innovation, affecting the intricate interplay between USPs size, incubation funding and revenue generation.

The single country (China) analysis relied solely on the use of secondary data. Future studies could expand the scope to include other countries and employ primary data collection. For instance, future research can further examine how regional development and USPs strategic plan impact revenue generation.

The study recommends that USPs managers and policymakers recognize the importance of incubation funding and determine the optimal quantity of USPs size to effectively foster revenue generation in USPs. Policymakers can use regional innovation as a moderating variable to reinforce the relationship between USPs size and incubation funding on revenue generation.

The study’s findings can contribute to the strategic industry growth and economic development of nations by promoting revenue generation. Leveraging the role of USPs and implementing the study’s recommendations can strengthen innovation and technology capabilities, driving strategic industry growth and economic development. This can enhance global competitiveness and promote sustainable economic growth.

This study introduces regional innovation as a moderating variable and provides empirical evidence of its influence on the relationship between USPs size and incubation funding on revenue generation. This adds value to research to the existing literature on USPs and revenue generation by showcasing the importance of examining the regional impact in research and innovation.

The purpose of this paper is to study the effect of temperature on Zn–Ni alloys in ChCl–Urea.

Based on cyclic voltammetry experiments, the deposition behavior and kinetics of the Zn–Ni alloy are studied. The nucleation process of the Zn–Ni alloy is studied in detail via chronoamperometry experiments. The effects of the deposition temperature on the microstructure, Ni content and phase composition of Zn–Ni alloy coatings are investigated via scanning electron microscopy and X-ray diffraction (XRD) combined with classical thermodynamics.

The results show that with increasing temperature, the reduction peak shifts toward a more positive electric potential, which is beneficial for the co-electric deposition process, and the diffusion coefficient is estimated. With increasing temperature, the nucleation process of the Zn–Ni alloy becomes a three-dimensional instantaneous nucleation, the typical kinetic parameters are determined using the standard 3D growth proliferation control model and the Gibbs free energy is estimated. The Zn–Ni alloy coatings are prepared via normal co-deposition. With increasing temperature, the degree of crystallinity increases, the coating gradually becomes uniform and compact and the XRD peak intensity increases.

The nucleation process of the Zn–Ni alloy at different temperatures is analyzed. The diffusion coefficient D and Gibbs free energy are calculated. The contribution of the three processes at different temperatures is analyzed. The effect of temperature on the morphology of the Zn–Ni alloy coatings is studied.

The purpose of this paper is to provide theoretical guidance and an experimental basis for a smart anti-corrosion coating of halloysite nanocontainers loaded with benzotriazole (BTA) inhibitors on copper in a marine corrosion environment.

In the present study, the smart anti-corrosion coatings of halloysite nanocontainers loaded inhibitors on copper were synthesized by adding BTA inside the halloysite nanocontainers. Then, the halloysite carrier’s surface topography and composition in the halloysite were observed using scanning electron microscopy. After the successful synthesis of the coating, the inhibitor’s physical and chemical properties, as well as the mass change in halloysite, were evaluated in terms of temperature fluctuation and time using thermal gravity analysis (TGA). Finally, electrochemical impedance spectroscopy was used to check the pH selectivity for the self-releasing of BTA out of the nanocontainers.

The results indicate that the efficiency of the nanotubes was enhanced by calcination at high temperatures. The thermal gravity analysis by TGA shows that halloysite nanoparticles store inhibitors BTA and there are approximately 37.39 Wt.% BTA loaded in each nanocontainer. The release of the preloaded BTA from the halloysite nanocontainers is pH 7 in a 3.5% NaCl solution.

The development of a new environmentally safe coating for corrosion protection of metallic surfaces has attracted great interest in material science over the past few years. At present, halloysite nanotubes (HNTs) have become a research hotspot internationally and are widely used in nanocomposites, catalysis, nanofiltration, drug sustained-release and other fields. However, the application of HNT is limited by its modification methods. As the carrier of metal nanocorrosion inhibitor in the Marine corrosive environment, the modification research of HNT still needs to be further studied and improved so as to expand the practical application of HNT in the Marine corrosive environment. In this paper, the modification of HNTs was investigated and observed. Four different modification schemes were used to observe and compare the structural properties of the nanotubes under different conditions so as to provide a theoretical basis for the further loading of HNTs as corrosion inhibitors.

Glass-cleaning robots were developed to perform the difficult, time-consuming and dangerous job of cleaning windows that had traditionally been done by humans. The wiping mechanism is the most important functional component of a glass-cleaning robot, which indirectly affects the design of the adsorption and transport mechanisms. This study aims to compare two types of wiping mechanisms – the drag-wiper and roller-wiper –through an analysis and an actual experiment, providing theoretical and measured data that can be applied to the optimization of the design of future glass-cleaning robots.

The authors undertook a theoretical force and energy consumption analysis of glass-cleaning robots and, based on the obtained results, undertook an analysis the two wiper types. They verified the theoretical analysis by conducting several experiments including studying the relationship between a wiper’s friction force and rotational speed, measuring the contact normal forces of the suckers, wiper and crawlers relative to the glass wall, measuring the energy consumed to drive the robot and studying the relationship between the vacuum pump’s power consumption and the adsorption force. The authors also compared the wiping efficacy of the drag-wiper robot and roller-wiper robot.

The drag-wiper offers the advantages of simplicity while being able to wipe the area around the edge of a window frame. Meanwhile, the use of a roller-wiper not only improves the robot’s driving performance and reduces the required adsorption force but can also reduce the amount of energy consumed to drive both the robot itself and also the vacuum pump; in addition, the roller-wiper is more flexible and energy- and time-efficient when dealing with dirt that is difficult to remove.

This study has, through a detailed analysis of the advantages and disadvantages of a drag-wiper and roller-wiper robot, from the three aspects of force analysis, energy consumption and wiping efficacy, obtained theoretical and measured data that can be applied to the optimization of the design of future industrial and household glass-cleaning robots.

The purpose of this paper is to investigate the mechanism of building trust during the transition from online payment to mobile payment, as well as to examine the effect of trust on the satisfaction and continuance intention of mobile payment users. Based on trust transfer theory, this study proposes that trust in online payment (i.e. trust in source) and two source-target relationship factors, namely, perceived similarity and entitativity, affect trust in mobile payment (i.e. trust in target). In turn, the resulting trust influences user satisfaction and continuance intention toward mobile payment in an online-mobile payment context.

The model was empirically tested on data collected from 219 mobile payment users of a famous payment enterprise in China.

The results indicated that the trust transfer process positively influences the continuance intention of mobile payment through satisfaction. Satisfaction is an important factor affecting continuance intention. Moreover, trust in online payment, perceived similarity, and perceived entitativity between online and mobile payments can positively influence trust in mobile payment.

This study investigates the post-adoption usage of mobile payment from the trust transfer perspective. It focuses on the trust-building process and emphasizes the importance of trust on the continuance intention toward mobile payment in an online-mobile payment context.

Innovative consumers are an important market segment. This paper seeks to investigate whether consumers' innate innovativeness is associated with their shopping styles. Specifically, it aims to explore the relationship between two types of innovativeness – sensory and cognitive – and consumer shopping styles.

The paper integrates the consumer innovativeness and consumer shopping styles literature. It is built on the premise that if consumer innovativeness is regarded as a general personality trait, then it would also be reflected in consumers' shopping approaches. A structural equation model is used to test the relationship between cognitive and sensory innovativeness and various shopping styles.

Sensory innovativeness and cognitive innovativeness can lead to different shopping styles. Cognitive innovators are inclined to show shopping styles such as quality consciousness, price consciousness, and confusion by overchoice. On the other hand, sensory innovators are inclined to have shopping styles such as brand consciousness, fashion consciousness, recreational orientation, impulsive shopping, and brand loyalty/habitual shopping.

The research is based on a convenience sample of young consumers in a particular country – China. Generalizability of the results would depend on future research conducted in other cultures and consumers of other age groups.

The findings of this research help managers to develop a deeper insight into product development and marketing. Product form can be designed to appeal to the two different types of innovative consumers – cognitive innovators and sensory innovators. Marketing communication and brand management should be based on the shopping styles of these different types of innovative consumers. Furthermore, since the youth market in China represents an enormous opportunity for marketers, the paper provides valuable insights into this key market segment in one of the most important markets in the world.

The paper is the first step in exploring the relationship between consumer innovativeness and consumer shopping styles. It provides new insights into the shopping patterns of consumers who belong to different innovativeness types. In addition, it also makes a new contribution to the shopping styles literature by exploring potential antecedents to the various shopping styles.