Search results

The purpose of this study is to evaluate the effectiveness of nanocontainer solutions in removing deteriorated and aged polymers commonly used in coating and consolidating archaeological glass.

This study focused on characterizing glass surfaces coated with two commonly used polymeric materials in archaeological glass preservation. Furthermore, the study evaluates the elimination of these coatings from the surfaces by using innovative aqueous systems composed of micellar solutions (MS) and oil-in-water (O/W) Texapon-P microemulsions (TEX). Glass samples coated with selected polymers were subjected to thermal and photochemical aging to simulate natural degradation conditions. This study aimed to evaluate the effectiveness of nanocontainer aqueous systems compared to acetone (Ac), a conventional solvent commonly used for removal procedures. The characterization procedures involved transmission electron microscopy, USB digital microscopy, scanning electron microscopy, color alteration and gravimetric measurement.

The findings indicate that the effectiveness of novel techniques using aqueous nanocontainer systems is quite promising when considering a “green approach” to preserving cultural heritage. Microscopic examination demonstrated the efficacy of MS in effectively removing acrylic and vinyl polymers from the glass surface. Furthermore, TEX proved effective in removing polyvinyl acetate (PVA) over Paraloid B72 (B-72). In addition, the measurement of color alteration values revealed a decrease after using MS compared to the standard sample before applying the polymers, with values of ΔE = 1.48 and 1.82 for B-72 polymer and PVA, respectively.

This research provides nanocontainer solutions for removing aged polymers from the glass surface. This makes the current study a promising step for treating archaeological glass.

The study aims to assess the efficiency of nanocomposite to improve the properties of gap-filling materials for pottery artifacts.

Five different pastes were used in the laboratory studies. The pastes consist mainly of pottery powder (grog), dental plaster, microballoons and an adhesive of Primal AC33, nano-silica and nano kaolinite in various concentrations. The prepared samples were subjected to accelerated heat and light aging. Besides, some investigations were used to evaluate the efficacy of the additive nanomaterials, such as TEM, digital and scanning electron microscopy microscopes. Contact angle, color change, shrinkage degree, physical properties and compressive strength tests were also conducted.

The results indicated that using Nano-silica considerably improves the mechanical strength and decreases the shrinkage of gap-filling materials. According to the results, a mixture of grog, microballoons and Primal AC33/Nano-silica Nanocomposites is the optimal gap-filling paste for archaeological pottery. Moreover, this paste showed a higher contact angle (120°), lower color change (ΔE = 2.62), lower shrinkage (3.3%), lower water absorption (3.36%), lower porosity (5.05%) and higher compressive strength (5124 N/mm²).

This paper attains to develop an economic polymer-nanocomposite that can be used with gap-filling materials for pottery artifacts.

This study aims to offer an effective nanocomposite for potential use to consolidate and protect deteriorated archaeological pottery.

Three nanocomposites were used in the experimental study. This study used nano Primal AC33, silicon dioxide (SiO₂) and montmorillonite (MMT) nanoparticles to protect and consolidate pottery specimens. Pottery specimens were made at 800°C for this investigation. Consolidation materials were applied with a brush. The properties of the treated pottery specimens were assessed using several methods such as digital and scanning electron microscopes, static water contact angle, color alteration, physical properties and compressive strength.

Microscopic examination indicated the ability of the nano Primal AC33/MMT nanocomposites to cover the outer surface well and bind the inner granules. Concerning specimens with code F treated with nano Primal AC33 5%/MMT 3% nanocomposites, it achieved an increase in contact angle (120°), density (1.23 g/cm³) and compressive strength (561 kg/cm²), as well as a decrease in color change (ΔE = 2.62), water absorption (4.45%) and porosity (5.46%). The novelty of the results is due to the characteristics of nano Primal AC33 5%/MMT 3% nanocomposites used in the current study.

This study describes the significant results of the analytical methods used for evaluating consolidation materials used in this study. The findings offer useful information for the protection of archaeological pottery. The investigation indicated that nano Primal AC33 5%/MMT 3% nanocomposites gave the best results. Therefore, it is recommended to use this nanocomposite to consolidate archaeological pottery. As a result, the current work provides a promising first step in conserving archaeological pottery for future studies.