Search results

The study aims to analyse the stability of embankments over the improved ground with stone column (SC) and pervious concrete column (PCC) inclusions using limit equilibrium method. The short-term stability of PCC-supported embankment system is rarely addressed. Therefore, the factor of safety (FOS) of column-supported embankment system is calculated using individual column and equivalent area models.

The stability analysis of column-supported embankment system is conducted using PLAXIS LE 2D. The various geometrical and shear strength parameters influencing the FOS of these embankment systems such as diameter of columns, spacing between columns, embankment height, friction angle of column material, undrained cohesion of weak ground and cohesion of PCC are considered.

The critical failure envelope of PCC-supported embankment system is observed to be of toe failure, whereas the failure envelope of stone column-supported embankment system is generally of deep-seated nature.

It is found that for PCC embankment system, FOS and failure envelope are not influenced by the geometrical/shear strength parameters other than height of embankment. However, for stone column-supported embankment system, FOS and failure envelope are dependent on all the shear strength and geometrical parameters considered in this study.

The paper aims to present an experimental and numerical investigation of the load–settlement behavior of soil reinforced by stone column, as well as to evaluate the plane strain unit cell model for the analysis of stone columns.

The numerical analysis was done using both axisymmetric and plane strain models. The elastic perfectly plastic behavior of Mohr–Coulomb was adopted for both soil and column material. The numerical results of this study were validated by the comparison with the in-situ measurements of a full-scale loading test on a stone column. This study also evaluated the effect of different parameters involved in the design of a stone column, including Young’s modulus of the column material, column diameter, spacing between the stone columns and Poisson’s ratio of the column material.

After the numerical simulation, the results from both axisymmetric and plane strain models are quite comparable. In addition, the numerical results revealed that the stone column with low spacing, a large diameter and a high Young’s modulus indicated better behavior against the settlement.

The axisymmetric unit cell model was used in many numerical studies on the behavior of stone columns. In the present work, a field load test on stone column was simulated using a plane strain unit cell model. This research adds that the plane strain unit cell model can be used to predict the settlement of reinforced soil with stone columns.

Smart urban governance research has progressed over the past few decades following changes and increasingly complicated city management difficulties. Therefore, the purpose of this paper is to use a scoping review and bibliometric analysis to examine all the publications on smart urban governance, especially in Asia.

A total of 1,900 smart urban governance articles indexed in the Scopus database was analyzed through scoping review and bibliometric analysis. The articles were analyzed by the number of publications per year, contributing countries, subject areas, authors, cited documents, related issues and cited papers. Furthermore, VOSviewer was used to provide a visual analysis of the co-occurrence of keywords.

This study indicated that urban smart governance publications continue to increase yearly. Even though the area of analysis is Asia, the USA and China seriously contributed to the analysis. Therefore, the topic of smart urban governance has become a discussion for scholars in the international. From the Scopus database analysis, the top three subject areas are social sciences (28%), environmental science (20%) and medicine (16%). The synthesis using bibliometric analysis by VOSviewer obtained 13 clusters.

This study only focuses on the Scopus database and one specific topic, using one bibliometric analysis tool. Meanwhile, national and international index databases are not used.

This paper examined publication trends on smart urban governance. This paper provided a comprehensive analysis of topic-specific knowledge areas based on previous studies. Additionally, this paper suggested the direction of the development of smart urban governance in the future.

The purpose of this study was to determine whether combining a structured stretching program with functional movement/body position training would yield additive effects on flexibility, ergonomic practices, and subjective pain levels for employees at high risk for work-related musculoskeletal disorders.

Nine control and 13 experimental university cleaning staff participated in a 10-week full-body stretching intervention led by undergraduate students. Experimental participants also engaged in functional movement/body position training once per week. Joint range of motion, task ergonomic form, pain level, and stretching motivation results were compared pre- and post-intervention.

Overall flexibility (+25.75 ± 3.33%) and task ergonomic form (+26.3 ± 10.5%) significantly improved and were negatively correlated with pain levels (r = −0.541 and r = −0.317, respectively). Experimental participants experienced greater improvements in shoulder (control: +16.8 ± 9.0%; experimental: +64.2 ± 11.5%) and hip (control: +31.4 ± 9.9%; experimental: +91.2 ± 19.9%) flexibility as well as in task-specific ergonomic form for vertical (control: +0.0 ± 5.3%; experimental: +35.2 ± 10.1%) and horizontal wiping (control: −4.7 ± 4.7%; experimental: +29.0 ± 7.8%). Intrinsic motivation was increased for both groups (+26.2 ± 15.4%).

Supplementing a workplace stretching program with functional movement/body position training has the potential to improve flexibility and decrease pain while simultaneously increasing the likelihood that cleaning staff will participate in self-directed stretching in the future. The intervention serves as a model for workplace health management and wellness-focused community building on university campuses who insource cleaning staff.

This study aims to examine the reuse of plastic and fly ash (FA) to improve the soil and achieve sustainable development goals.

Sand from the Anzali port was reinforced with Geopet (GP) and stabilized with FA plus 3% sodium hydroxide. The GP was placed in FA-stabilized soil and the California bearing ratio (CBR), and unconfined compressive strength (UCS) tests were performed on samples at the optimum moisture content.

The results showed that the improvement in the optimum CBR was 174.9%. The UCS increased 15.25% and 48.65% in soil reinforced with three layers of GP plus 15% FA over those containing 10% and 5% FA, respectively. Additionally, the current analysis used response surface methodology (RSM) to investigate the impact of FA percentage, GP layers and their interaction on CBR. The results highlight the efficacy of the used RSM model, as evidenced by the significantly low p-value (<0.0001).

This demonstrates the suitability and effectiveness of RSM for evaluating CBR in this scientific study.

Physical activity (PA) has been widely studied for its individual and societal benefits, but research on how organisations can effectively promote workplace physical activity (WPA) programmes is lacking. This article aims to examine the organisational-level benefits and value drivers of corporate PA programmes whilst also exploring the factors that motivate employees to participate in these programmes.

The authors used the self-determination theory (SDT) and the Hungarian Sport Motivation Scale (H-SMS) – which was modified and validated from the original English SMS scale, which is one of the six most highly cited motivation questionnaires in sports – to assess employees' motivation towards sports. In conjunction, in-depth interviews with company representatives were conducted to create a mind map outlining the impacts and advantages of WPA programmes. The study involved interviews with 13 managers in Hungary and a survey completed by 728 employees.

The findings of the authors' study indicate that WPA programmes had positive effects on employee engagement, turnover reduction and absenteeism. However, the authors' results also revealed that employee motivation to participate in these programmes was primarily driven by external factors, such as identified and introjected regulators, indicating a low level of intrinsic motivation for sports in the workplace. It is important to classify employees based on their motivation and behaviour to design and promote effective PA programmes in the workplace and to increase participation rates.

The authors' findings indicate the importance of aligning WPA programme promotion with employee motivation. This can encourage organisations to initiate their programmes, address participation challenges and strive for higher engagement rates. Further research on employee motivation can support the development of more effective communication strategies for companies in this context.

Moral aspects of food are gaining increased attention from scholars due to growing complexity of the food system. The foodservice system is a complex arrangement of stakeholders, yet has not benefited from similar scholarly attention on the moral facets. This gap is of significance given that the foodservice system has increased in importance with the larger proportion of food consumed in foodservice environments. This paper aims to focus on the foodservice system with the goal of applying moral perspectives associated with the theoretical discussion on the principles of food ethics.

Food ethics is described within the theoretical framework of three principles, namely, autonomy, justice and well-being. These ethical principles are reviewed in context of the foodservice system comprised of food distribution (supply chains), preparation (foodservice establishments) and consumption (consumer demand). The review also includes international perspectives on foodservice system ethics to assess relativism (versus universalism) of moral issues.

As the foodservice system increases in complexity, greater discussion is needed on the ethics of this system. This study observes that ignoring ethical principles can negatively impact the ability of consumers, businesses and communities to make informed choices, and on their well-being. Alternatively, a focus on understanding the role of food ethics can provide an anchor for research, practice and policy development to strengthen the foodservice system. While these moral principles are universal truths, they will require relative introspection globally, based on local experiences.

This paper presents a moral principle-based description of food ethics that incorporates the various components of the expanding foodservice system.

The purpose of this paper is to present a road map to implement Lean-Kaizen concept using value stream mapping (VSM) to identify hidden continuous improvement opportunities in a small and medium-sized enterprise (SME) located at the non-capital region of India.

From the collected data, a current state map was prepared that indicated the current operating situation of selected SME. The takt time was calculated and those processes which attained higher cycle time (C/T) than takt time were identified. The continuous flow processing was achieved by adjusting C/T of each process and supermarket pull system was developed to control the production at the workstations. Finally, a future state map was developed that served as a guide for future lean activities. Few problems were identified to realize the future state. The “5-why” analysis was used for identifying root causes of these problems and Kaizen events were proposed as solutions. In this case study, one Kaizen event was identified in which brainstorming technique was used to control the variation caused by unorthodox fixture design for clamping and de-clamping of case product and thus eliminated non-value-added activities performed by the operator on a milling machine.

Before and after implementation of value stream map, the data obtained were analyzed and eliminated rework time, reduced inventory level, reduced lead time and C/T, improved productivity and product quality are presented as finding. Lean-Kaizen provides a better chance for every individual of the industry to have a hand in achieving organization’s goals to attain continuous progress in productivity and quality of the product. Even good understanding of the concept of lean tools and techniques by SMEs, the employee willingness and motivation to identify and eliminate wastes are found feeble.

This study is among best practices to identify hidden improvement opportunities in the regular production of the product to increase productivity and improve quality using value stream map. The research paper gives useful understandings to the lean implementers, Kaizen identifiers, consultants and researchers.

Since its conception over 60 years ago by Frederick in 1934, the concept of segmentation has gained increasing importance, in both the consumer and the business domains. Examination of research within the latter domain indicates that, although considerable amounts of research have been carried out, these efforts appear to focus on sub‐areas of segmentation such as the development of segmentation bases and models, at the expense of a more strategic view. This not only has resulted in a diffused understanding of the subject‐matter but also is posited to have slowed the progress of theory development and research in business segmentation. Presents a comprehensive conceptualisation of business segmentation in the form of an integrating framework of business segmentation, aimed at raising new research agendas which could lead to a better understanding of existing gaps between theory and implementation and better recommendations to practitioners and assisting further development of theory in business segmentation.

Market segmentation is widely regarded as a panacea for a variety of marketing ailments. Yet research in the financial services market highlights a number of significant barriers to the implementation of segmentation schemes. These barriers range from weaknesses in customer data and inappropriate organisational structure, to lack of marketing orientation and difficulties in obtaining a fit within the existing distribution structure. While the marketing literature acknowledges that these difficulties exist, there has been little formal analysis to capture the characteristics of these barriers. This problem is compounded by the considerable size and diversity of the sector which make it difficult to generalise about the implementation problems. This means that the extent of any barriers may vary in different areas of the financial services market and even in different organisations and that this variation may feasibly translate into different levels of segmentation usage. This research uses four short financial services case studies to examine the application of segmentation and consider the implementation barriers. Although the case studies cover a range of financial services companies, the analysis focuses on the provision of charge/credit cards by these organisations. The growth rate and increasing importance of the charge/credit card business make this a particularly pertinent area to analyse and allow a comparison with retail banking services more generally. The findings support the notion that a range of barriers to segmentation exists and shows how the importance of these barriers varies in different organisations.