Search results

The aerodynamic differences between the head car (HC) and tail car (TC) of a high-speed maglev train are significant, resulting in control difficulties and safety challenges in operation. The arch structure has a significant effect on the improvement of the aerodynamic lift of the HC and TC of the maglev train. Therefore, this study aims to investigate the effect of a streamlined arch structure on the aerodynamic performance of a 600 km/h maglev train.

Three typical streamlined arch structures for maglev trains are selected, i.e. single-arch, double-arch and triple-arch maglev trains. The vortex structure, pressure of train surface, boundary layer, slipstream and aerodynamic forces of the maglev trains with different arch structures are compared by adopting improved delayed detached eddy simulation numerical calculation method. The effects of the arch structures on the aerodynamic performance of the maglev train are analyzed.

The dynamic topological structure of the wake flow shows that a change in arch structure can reduce the vortex size in the wake region; the vortex size with double-arch and triple-arch maglev trains is reduced by 15.9% and 23%, respectively, compared with a single-arch maglev train. The peak slipstream decreases with an increase in arch structures; double-arch and triple-arch maglev trains reduce it by 8.89% and 16.67%, respectively, compared with a single-arch maglev train. The aerodynamic force indicates that arch structures improve the lift imbalance between the HC and TC of a maglev train; double-arch and triple-arch maglev trains improve it by 22.4% and 36.8%, respectively, compared to a single-arch maglev train.

This study compares the effects of a streamlined arch structure on a maglev train and its surrounding flow field. The results of the study provide data support for the design and safe operation of high-speed maglev trains.

In today’s Taiwan, sha-cha sauce is an indispensable ingredient for beef hot pot and stir-fried dishes. The purpose of this paper contextualizes the history of sha-cha sauce in Tainan, the oldest city in Taiwan, and argues that sha-cha sauce, introduced by Chaoshan immigrants, has contributed to new styles and habits of beef consumption tastes and habits in the post-1949 Tainan and beyond.

This paper uses documentary materials, oral interviews and diaries to explore the relationship between beef consumption and sha-cha sauce. It begins with an historical overview of Taiwan’s beef consumption during the Japanese colonial era (1895-1945). Then, it focuses on two Chaoshan business enterprises: the Bull-Head, which makes the world’s largest “canned sha-cha sauce,” and the Xiao Haozhou, a Tainan restaurant specializing in sha-cha beef hot pot. Finally, this study analyzes Xinrong Wu, a Tainan gentry whose diary entries from 1933 to 1967 documented the changing dietary habits of beef consumption among Taiwanese.

The Chaoshan migrants played an important role in introducing the sha-cha sauce to postcolonial Tainan, and this input bolstered the beef consumption among Taiwanese. The production of sha-cha provided a reliable source of income for these migrants in Tainan, and major businesses like the Bull-Head became the international brands of Taiwanese food products.

The study, though limited to Tainan, reveals the symbiosis between popularization of sha-cha sauce and widespread beef consumption in Taiwan.

This study helps researchers examine the connection between Chinese migrations and food culture.

This paper is an original scholarly investigation of the relationship between food diet and Chaoshan migration in postcolonial Tainan.

This study aims to investigate Feng Shui elements that can influence housing selection and property pricing in the Malaysian housing market.

A structured questionnaire encompassing 26 Feng Shui elements, which were shortlisted based on relevant previous studies, was distributed to prospective homebuyers in the Klang Valley region. The elements were inferred and ranked according to frequency, significance and importance scores. Kruskal–Wallis ANOVA tests were used to assess the ratings provided by the different respondent groups, while Spearman's rank correlation tests were utilised to measure the degree of agreement or disagreement among each pair of the ethnic group.

The results obtained indicate the following as the five most influential elements: orientation, main entrance, street location, house number and living room. Despite a multiethnic and multicultural society in Malaysia, Spearman's rank correlation tests showed that there are no differences in the prioritisation of Feng Shui elements between three distinct ethnic groups (Malay, Chinese and Indian). However, the distribution scores are statistically different between the groups. Comparing income level with Feng Shui inclinations, the three most frequently considered elements across the three income groups consistently include orientation, main entrance and street location.

The findings of this study are expected to provide guidance to property stakeholders (developers, real estate agencies, architects, local authorities) in their future development projects. For homebuyers, this study serves as a property Feng Shui checklist for home selection and investment.

This study explored the association of Feng Shui principles to housing selection and property pricing based on cultural and income factors. These findings provide useful insights for designing and positioning of residential properties in both primary and secondary housing markets in Malaysia and beyond.

The Ni-based superalloy IN-738 LC is known to be susceptible to porosity and different types of cracking during the build-up process and, thus, challenging to manufacture using selective laser melting (SLM). Determining a feasible set of operating parameters for SLM of nickel-based superalloys involves new approach to experimental design based on the Doehlert method that assists in determining an optimal (feasible) set of operating parameters for SLM of IN-738 LC powder alloy.

The SLM parameters are evaluated in terms of their effectiveness in obtaining the microstructure with a porosity content of <0.5 per cent and without micro-cracking. The experimental approach is exemplified with the Doehlert matrix response variable, relative density, by comparing Archimedes method with microstructural assessments of pores and cracks from image analysis. The effect of heat treatment (HT) and hot isostatic pressing (HIP) on the microstructure of the SLMed IN-738 LC powder alloy has been examined and the consequential tensile response characterised.

By using optimised process parameters (low heat input, medium scanning speed and small hatching distance) which provides medium energy density, samples of IN-738 LC with a macroscopic porosity <0.5 per cent and free of micro-cracks can be manufactured by SLM. The results indicate that HIP of SLMed material did not lead to a noticeable effect on mechanical properties compared to HT of SLMed material suggesting that the level of both porosity and crack density might be already below the detection limit for the mere heat-treated material.

SLM processing parameters (power, scan speed, hatching distance) for IN-738 LC were successfully optimised after only 14 experiments using Doehlert design. Two independent methods, Archimedes method and image analysis, were used in this study to assess relative density of SLM-produced samples with sets of processing parameters showing coherency in prediction with predicted response by Doehlert design.

Security is one of the major challenges in the design and implementation of protocols for mobile ad hoc networks (MANETs). In such systems, the cooperation between nodes is one of the important principles being followed in the current research works to formulate various security protocols. Many existing works assume that mobile nodes will follow prescribed protocols without deviation. However, this is not always the case, because these networks are subjected to a variety of malicious attacks. Since there are various models of attack, trust routing scheme can guarantee security and trust of the network. The purpose of this paper is to propose a novel trusted routing model for mitigating attacks in MANETs.

The proposed model incorporates the concept of trust into the MANETs and applies grey relational analysis theory combined with fuzzy sets to calculate a node’s trust level based on observations from neighbour nodes’ trust level, these trust levels are then used in the routing decision-making process.

In order to prove the applicability of the proposed solution, extensive experiments were conducted to evaluate the efficiency of the proposed model, aiming at improving the network interaction quality, malicious node mitigation and enhancements of the system’s security.

The proposed solution in this paper is a new approach combining the fundamental basics of fuzzy sets with the grey theory, where establishment of trust relationships among participating nodes is critical in order to enable collaborative optimisation of system metrics. Experimental results indicate that the proposed method is useful for reducing the effects of malicious nodes and for the enhancements of system’s security.

Since the beginning of the new millennium, Confucian doctrines on one’s self-cultivation have been re-introduced to curriculum in China. The revived cherish of the Confucian legacy in the twenty-first century is a reverse from the official rejection of Confucianism in the Mao era (1950–1976). It also appears as a counterweight to the individualism proliferating among the Chinese youths born at the beginning of the new millennium (Gen Z). The re-introduction of Confucianism is thus ideologically purposeful. Yet how does the mixed exposure to Confucius’ legacy and the modern idea of self-awareness impact this cohort of young people, in particular their way of learning? This chapter focusses on Chinese Gen Z studying in Australia. Using the Bourdieuan theory of human habitus, this chapter examines how these students negotiate between the ideas of self-cultivation and self-awareness, and what implications such experiences have in an intercultural academic community.

Preventing and tackling bullying effectively are important agenda for schools to safeguard all children’s well-being, engagement and sense of belongingness. Children perceived to be different from their peers tend to have a higher risk of being bullied at school, in particular, children with disabilities. It can be challenging for teachers to stop bullying that targets children with disabilities. This chapter considers bullying as a barrier to ensuring inclusive and quality education for everyone. It draws on findings from an ethnographic study concerning the status of inclusion of children identified as having learning difficulties in mainstream schools in China, by listening to what children and teachers have to say (Wang, 2016). The study found that the child participants were subject to forms of bullying. They found it useful to gain support from others when bullying happened, and they showed empathy towards peers’ well-being. The teacher participants reflected on the dilemmas and challenges of dealing with bullying and were keen to share experiences about what they found helpful in addressing the issue. The chapter discusses how insights about bullying learned from children and teachers can be used to inform the enactment of inclusive pedagogy. It is concluded that an inclusive pedagogical response that recognizes every child’s voice is necessary for tackling bullying and co-creating an inclusive environment.

Double-jacquard technique is referred as the most advanced technology for forming patterns on both layers of a 3D fabric knitted on a double-needle bar warp-knitting machine. In order to realize the computer-aided design and simulation of jacquard patterns, the purpose of this paper is to propose a mathematic model for representation of jacquard structures and an improved mass-spring model to improve the simulation of structural deformation behavior.

Primarily, it analyzes the jacquard patterning method and displacing principle to design jacquard structures on each layer and linking structures of two layers. Based on that, a loop geometry defined by six key points and segmental lines is built to transfer the jacquard bitmap and lapping movements into a fabric of loops and therefore realizing patterns visualization. Afterwards, an improved mass-spring model is built to simulate structural deformation, in which the fabric is simplified as a mesh of uniformly distributed mass particles. Each loop is treated as a massless particle while underlaps are referred as structural springs connecting loops particles. Elastic forces of these springs on each loop particle is calculated according to the Hook’s law and Newton’s second law, and then based on the explicit Euler’s equations, motion state of each particle is solved including the velocity and the shift.

Based on the above method, a simulator for double-layer jacquard fabrics is developed via Visual C++ language to visualize the patterned fabrics with pitting effects. With a jacquard shoe fabric as an example, this simulation model is proved to be practical and efficient by comparing the simulation result and real fabric.

Because of limited researches, 3D simulation modeling of this double-layer jacquard fabric will be studied in the further research.

The implement of this simulation method will offer the industries a time-saving and cost-saving approach for new fabrics development.

This approach can be used as a reference for simulating other knitted fabrics with jacquard patterns, such as jacquard garment fabrics and home textile fabrics.

The data protection is always a vital problem in the network era. High-speed cryptographic chip is an important part to ensure data security in information interaction. This paper aims to provide a new peripheral component interconnect express (PCIe) encryption card solution with high performance, high integration and low cost.

This work proposes a System on Chip architecture scheme of high-speed cryptographic chip for PCIe encryption card. It integrated CPU, direct memory access, the national and international cipher algorithm (data encryption standard/3 data encryption standard, Rivest–Shamir–Adleman, HASH, SM1, SM2, SM3, SM4, SM7), PCIe and other communication interfaces with advanced extensible interface-advanced high-performance bus three-level bus architecture.

This paper presents a high-speed cryptographic chip that integrates several high-speed parallel processing algorithm units. The test results of post-silicon sample shows that the high-speed cryptographic chip can achieve Gbps-level speed. That means only one single chip can fully meet the requirements of cryptographic operation performance for most cryptographic applications.

The typical application in this work is PCIe encryption card. Besides server’s applications, it can also be applied in terminal products such as high-definition video encryption, security gateway, secure routing, cloud terminal devices and industrial real-time monitoring system, which require high performance on data encryption.

It can be well applied on many other fields such as power, banking, insurance, transportation and e-commerce.

Compared with the current strategy of high-speed encryption card, which mostly uses hardware field-programmable gate arrays or several low-speed algorithm chips through parallel processing in one printed circuit board, this work has provided a new PCIe encryption card solution with high performance, high integration and low cost only in one chip.