Search results

This study aims to polymerize of 1-butyl-3-vinylimidazolium bromide (PIL). PIL was embedded into PVA with a different content ratio by casting method. This research also deals with the effect of adding PIL in different proportions to PVA on the electrical and mechanical properties properties in addition to the morphology of the prepared samples.

1-Butyl-3-vinylimidazolium bromide was synthesized through quaternization and free radical polymerization. The resulting polymer was characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis and differential scanning calorimetry. In addition to the morphology of PVA, PVA/PIL was investigated by polarizing microscope. Also, the effect of PIL content on the electrical and mechanical properties was evaluated.

The findings of this study might lead to new applications for PVA and PILs in electrical and dielectrics. The mechanical results revealed that the tensile strength increased slightly with increasing polyionic liquid (PIL) content and decreased above 10% PIL. While the elongation at break increased significantly with increasing PIL content and begin to decrease above 10% PIL. Also, the electrical property of the poly(vinyl alcohol) (PVA)/PIL blends was improved because of the strong plasticizing effect of PIL. Also, the electrical conductivity of these polymer electrolytes is greatly increased. This indicates that the imidazolium-based PIL has an effective approach that leads to an increase in the conductivity of the polymer. The PILs/PVA design will not only enrich the chemical structure but also will contribute to green manufacturing techniques and a processing methodology that enables green membrane manufacture.

This study contributes to green manufacturing techniques and a processing methodology that enables “green” membrane manufacture.

The purpose of this study is to utilize two types of gypsum mold wastes from two different factories as novel and economical reinforcing fillers for composites that may be useful for building materials and floors. Two types of gypsum mold wastes from two different factories as raw materials were incorporated into linear low density polyethylene (LLDPE) aiming to get rid of that waste in one hand and obtaining useful economical composites suitable for building materials and floors.

Composites were prepared from two types of gypsum mold wastes substituted with different ratios from raw gypsum and LLDPE throughout the melt blending technique. The physico-mechanical and electrical investigations in addition to the morphology of the composites were included.

The mechanical results illustrate that substituting commercial gypsum with gypsum mold waste positively affects tensile strength, flexural strength and hardness shore D for the LLDPE composites. The tensile strength increased from 5 MPa for LLDPE filled with commercial gypsum as blank samples to 11.2 and 13.2 MPa for LLDPE filled with D and S waste. Also, electrical properties which include both permittivity ɛ′ and dielectric loss ɛ″ increased with increasing the waste content in the LLDPE matrix. In addition to the electrical conductivity values, σ lies in the order of insulation materials. Consequently, it is possible to produce materials with a gypsum matrix by adding industrial waste, improving the behavior of the traditional gypsum and enabling those composites to be applied in various construction applications as eco-friendly tiles.

This study aims to prepare eco-friendly composites based on LLDPE and waste gypsum mold to preserve resources for the coming generations, other than lowering the environmental footprint and saving the costs of getting rid of it.

This study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in different proportions to reach good mechanical and insulating properties for antimicrobial and antistatic applications.

Eco-friendly composite films based on waste polyvinylchloride (WPVC) and SSC of concentrations (0, 10, 20, 30 and 40 Wt.%) were prepared using solution casting method. Further, the effect of sunflower seed oil (SSO) on the biophysical properties of the prepared composites is also investigated. Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscope, mechanical, thermal, dielectric properties were assessed. Besides, the antimicrobial and biodegradation tests were also studied.

The crystallinity increases by rising SSC concentration as revealed by XRD results. Additionally, the permittivity (ε′) increases by increasing SSC filler and SSO as well. A remarkable increase in dc conductivity was attained after the addition of SSO. While raw WPVC has very low bacterial activity. The composite films are found to be very effective against staphylococcus epidermidis, staphylococcus aureus bacteria and against candida albicans as well. On the other hand, the weight loss of WPVC increases by adding of SSC and SSO, as disclosed by biodegradation studies.

The study aims to reach the optimum method for safe and beneficial disposal of PVC waste as well as SSC for antistatic and antimicrobial application.

Calcium and Zinc lignates were proven to be good antioxidants for rubber composites. The purpose of this paper is to evaluate the copper lignate antioxidant activity along with evaluating its electrical conductivity in rubber composites.

The antioxidant activity of the Cu-LSF complex was compared with that of standard commercial antioxidant additives as a green alternative. The rheological characteristics, thermal aging and mechanical and electrical properties were evaluated for the NBR vulcanizates containing the different antioxidants in the presence or absence of coupling agents.

Results revealed that the Cu-LSF complex (5 phr) can function as a compatibilizing, antioxidant and electrical conductivity agent.

The new copper complex prepared from paper-pulping black liquor of wastes could be used as a green antioxidant and electrical conductivity agent in rubber composites.

This paper aims to express in detail the rheological, morphological and thermal properties of unpigmented and pigmented styrene-butadiene rubber composites with new prepared inorganic pigment based on kaolin covered with a thin layer of calcium and magnesium oxides or mixed oxide of both together. These new pigments combine the properties of both their constituents (kaolin and metal oxides), which are a new trend in inorganic pigments called core-shell pigments. The pigments used for comparison are kaolin (K), CaO/kaolin (CaO/K), MgO/kaolin (MgO/K) and CaO.MgO/kaolin (CaO.MgO/K).

The different pigments were characterized using different analytical and spectrophotometric techniques, such as X-ray diffraction, scanning electron microscopy/energy dispersive X-ray and transmission electron microscopy, while rubber vulcanizates' rheological, morphological, swelling and thermal properties were examined using different standard and instrumental testing and methods.

The study revealed that there is a significant effect of the new prepared pigments on SBR properties, where the optimum pigment loading was 40 phr for CaO/kaolin, while it was 2.5 phr for MgO/kaolin. Studying the effect of different ratios of oxides on kaolin (5, 10 and 20 per cent), different loadings of these pigments ranging between 2.5 and 40 phr were done for each pigment. These modified kaolin or core-shell metal oxide/kaolin pigments imparted new and improved reinforcing properties to SBR vulcanizates.

No research limitations were found.

Core-shell MgO/kaolin pigments are eco-friendly and can replace other expensive pigments that are usually used as fillers in the rubber industry with less expenses and comparable efficiency.

These new pigments are cheap and efficient and can be used in different fields other than rubber.