Search results

This study aims to study the distribution characteristics of antibiotic resistance in direct-eating food and analysis of Citrobacter freundii genome and pathogenicity. Residual antibiotics and antibiotic resistance genes (ARGs) in the environment severely threaten human health and the ecological environment. The diseases caused by foodborne pathogenic bacteria are increasing daily, and the enhancement of antibiotic resistance of pathogenic bacteria poses many difficulties in the treatment of disease.

In this study, six fresh fruits and vegetable samples were selected for isolation and identification of culturable bacteria and analysis of antibiotic resistance. The whole genome of Citrobacter freundii isolated from cucumber was sequenced and analyzed by Oxford Nanopore sequencing.

The results show that 270 strains of bacteria were identified in 6 samples. From 12 samples of direct food, 2 kinds of probiotics and 10 kinds of opportunistic pathogens were screened. The proportion of Citrobacter freundii screened from cucumber was significantly higher than that from other samples, and it showed resistance to a variety of antibiotics. Whole genome sequencing showed that Citrobacter freundii was composed of a circular chromosome containing signal peptides, transmembrane proteins and transporters that could induce antibiotic efflux, indicating that Citrobacter freundii had strong adaptability to the environment. The detection of genes encoding carbohydrate active enzymes is more beneficial to the growth and reproduction of Citrobacter freundii in crops. A total of 29 kinds of ARGs were detected in Citrobacter freundii, mainly conferring resistance to fluoroquinolones, aminoglycosides, carbapenem, cephalosporins and macrolides. The main mechanisms are the change in antibiotic targets and efflux pumps, the change in cell permeability and the inactivation of antibiotics and the detection of virulence factors and ARGs, further indicating the serious risk to human health.

The detection of genomic islands and prophages increases the risk of horizontal transfer of virulence factors and ARGs, which spreads the drug resistance of bacteria and pathogenic bacteria more widely.

The purpose of this paper is to derive a new lubrication model of double involute gears drive and study the effect of the tooth waist order parameters of double involute gears on lubrication performance.

The new lubrication model of double involute gears drive was established according to the meshing characteristics of double involute gears drive and the finite length line contact elastohydrodynamic lubrication theory. Numerical calculation of the lubrication model of gear drive was conducted using the multigrid method.

The results show that the oil film necking phenomenon and the oil film pressure peak emerged at the tooth waist order area and the tooth profile ends, and when compared with involute gear, the lubrication performance at the tooth waist order area is better than that at the tooth profile ends. The effect of tooth waist order parameters on lubrication performance at the tooth waist order area was greater than that at other areas.

This research will promote the application of the double involute gear as soon as possible, and it has the reference value for other types of gears.

Outsourcing remanufacturing is a major form of remanufacturing, and emission reduction is an important part of a manufacturer's production. This paper aims to investigate carbon emission reduction strategies in a closed-loop supply chain (CLSC) with outsourcing remanufacturing and design a contract to coordinate the CLSC.

The authors establish two-period game models between an original equipment manufacturer (OEM) and third-party remanufacturer (TPR) in different scenarios, including decentralized decision, centralized decision and coordinated decision. Furthermore, the authors study the optimal decisions by maximizing the profit model. The authors also investigate the impact of a carbon tax and emission reduction on the optimal decisions through comparative analysis.

Emission reduction increases the quantity of new products and the OEM's profit. However, emission reduction decreases the outsourcing fee, which is not conducive to remanufacturing; thus, the TPR's profit does not necessarily increase. Compared with a decentralized scenario, the output of remanufactured products and the total profit increase. When the acceptance level of remanufactured products is high enough or when emissions from remanufacturing are low enough, the total carbon emissions are reduced in the centralized scenario. For the coordination of the CLSC, the OEM needs to increase the outsourcing fee and the TPR needs to share part of the emission reduction costs.

The TPR can choose three different remanufacturing strategies, namely, no remanufacturing, partial remanufacturing or full remanufacturing. For the majority of firms, it is difficult to remanufacture all used products. Therefore, the analysis is based only on partial remanufacturing.

The results provide insights for remanufacturing and emission reduction decisions, as well as a decision basis for the cooperation between the OEM and TPR.

The authors combine the OEM's carbon emission reduction with outsourcing remanufacturing, and investigate the impact of technological spillover on the TPR's profit.

Coastal zone ecological restoration project is of great significance to alleviate marine ecological degradation. Evaluating the effect of coastal ecological restoration projects and identifying the obstacle factors affecting their restoration level can provide an empirical basis for future Marine ecological restoration projects.

However, due to the initial stage of coastal zone ecological restoration projects, the actual monitoring data of coastal zone ecological restoration is relatively lacking. Based on the CRITIC-TOPSIS (combination of CRITIC method and TOPSIS method) method, combined with the subjective perception of the public and the actual data of the restoration project, this paper proposes an evaluation method of the coastal zone ecological restoration effect to obtain the specific implementation effect of the coastal zone ecological restoration project. The main obstacle factors affecting the evaluation of coastal ecological restoration effect are identified by using the obstacle degree model.

This paper conducted an empirical study on the restoration of sandy shoreline and coastal wetland in Qinhuangdao city. Based on the data of restoration projects and the subjective perception of ecological restoration by the public in Qinhuangdao city, the research results showed that the coastal zone ecological restoration effect of Qinhuangdao city was general. The quality of the restoration project and the public perception have an important influence on the evaluation of the restoration effect. Improving the quality of the restoration project, strengthening the public's participation in ecological restoration and allowing the public to better participate in the ecological restoration of the coastal zone can improve the effect of ecological restoration of the coastal zone in an all-round way.

The research results of this paper have a guiding role in the ecological restoration of coastal cities in the future, and also have a demonstration and reference role for the assessment of the effect of ecological restoration of coastal zones.

Despite recent organizational behavior studies have witnessed considerable progress in abusive supervision research; some demerits for both theory and methodology still remain in the past years. To clarify the current state of knowledge in the field, this study aims to analyze the current state of theories and methods on abusive supervision and provides a detailed future research agenda.

This paper conducted a literature review for both theory and methodology of the abusive supervision research using a content analysis of 134 publications.

For the theory part, this paper summarized the theories that had been applied to explain the relationship between abusive supervision and its consequences as well as antecedents. For the methodology part, this paper outlined some critical issues regarding country of origin, research design, measurement, analysis strategy and also summarized with a discussion of the relationship between methodological issues and article impact. Finally, this paper concluded by presenting an agenda for future abusive supervision research regarding both theory and methodology.

First, this paper summarizes the main theories, antecedents and consequences often used in abusive supervision research to allow scholars to carry out theoretically driven research investigating abusive supervision in the future. Second, through a content analysis of the methods sections of abusive supervision research in the samples (i.e. country of origin, research design, measurement and analytical procedures), this paper identified the potential reasons underlying the inconsistency in the conclusions of abusive supervision research and provide some guidance for future empirical studies. Third, based on the qualitative review, this paper provides an agenda for future research investigating abusive supervision by developing a content-specific theoretical framework to benchmark abusive supervision research against other research related to leadership and offers an accurate response to scholars’ criticisms of abusive supervision research.

An examination of the commonalities and differences between performance management practices in the public and private sector.

A literature review of 100 publications in international academic journals over the last 20 years.

The chapter develops a framework which links the dimensions of the public/private-distinction (ownership, funding, control and type of goals) to the design and use of performance management systems (PMS). This framework subsequently informs a literature review, which can be summarised as follows: Multi-dimensionality of the PMS is core in both public and private sector organisations, but quite many private sector papers point to a financial focus at the top of the PMS, while public sector organisations show a broad variety of performance indicators, including those on societally relevant goals. In addition, a link between the PMS and strategies can be found in the public and the private sector, but the match between different strategies and PMS design is more elaborated in the private sector. These findings are largely in accordance with our expectations. The review also finds support for the assumption that performance information in public sector organisations is primarily used for external accountability reasons, while internal managerial control is the main purpose in private firms. The use of performance information is quite intensive and mostly functional in both sectors, which does not meet our expectations. Overall, the differences between performance management practices in the public and private sector are less stringent than expected.

Due to limited evidence about the importance of performance-related pay systems and no evidence about targeting in both sectors, a more focused literature review on these issues would be desirable.

Mutual learning between both sectors, for example the public sector can learn from the private sector on how to link strategy to the PMS and the private sector can learn from the public sector about serving a multitude of stakeholders in the PMS.

A comprehensive review of performance management practices in the public and private sector.

Considers the factors which influence Taiwanese decisions to buy Japanese or US refrigerators, basing the conclusions on the results of a survey of 586 respondents drawn from Taiwan’s four largest cities – Taipei, Kaoshiung, Taichung and Tainan. Describes how the questionnaires were constructed and pretested, and explains how the data was recorded (using a 5‐point Likert‐type scale) and analysed (using factor analysis and t‐tests). Tests particularly for cultural values of the Chinese, consumer ethnocentrism, openness to foreign culture, country image, and consumer sophistication. Finds that, despite the longer presence of Japanese goods in Taiwan, Japan’s proximity to Taiwan, and more cultural similarities between the Japanese and Taiwanese, Taiwanese consumers rate the USA’s country image factor higher than Japan’s, with consequent implications regarding intention to buy US goods. Recommends that US marketers build on their advantageous country image when they promote US appliances in foreign markets. Cautions against making too much of this snapshot data but concedes that further research into different foreign markets, different appliances, and with a longitudinal approach, would ascertain if findings are consistent with this survey, which has obvious benefits as new markets, such as China and India, open up to western goods and appliances.

Concrete, the second most used material in the world, surpassed only by water, relies on a vast amount of cement. The process of cement production emits substantial amounts of carbon dioxide (CO₂). Consequently, it is crucial to search for cement alternatives. Geopolymer concrete (GC) uses industrial by-product material instead of traditional cement, which not only reduces CO₂ emissions but also enhances concrete durability. On the other hand, the disposal of concrete waste in the landfills represents a significant environmental challenge, emphasising the urgent need for sustainable solutions. This study aimed to investigate waste concrete's best form and rate as the alternative aggregates in self-compacting and ambient-cured GC to preserve natural resources, reduce construction and demolition waste and decrease pertinent CO₂ emissions. The binding material employed in this research encompasses fly ash, slag, micro fly ash and anhydrous sodium metasilicate as an alkali activator. It also introduces the best treatment method to improve the recycled concrete aggregate (RCA) quality.

A total of25%, 50% and 100% of coarse aggregates are replaced with RCAs to cast self-compacting geopolymer concrete (SCGC) and assess the impact of RCA on the fresh, hardened and water absorption properties of the ambient-cured GC. Geopolymer slurry was used for coating RCAs and the authors examined the effect of one-day and seven-day cured coated RCA. The mechanical properties (compressive strength, splitting tensile strength and modulus of elasticity), rheological properties (slump flow, T500 and J-ring) and total water absorption of RCA-based SCGC were studied. The microstructural and chemical compositions of the concrete mixes were studied by the methods of energy dispersive X-Ray and scanning electron microscopy.

It is evident from the test observations that 100% replacement of natural aggregate with coated RCA using geopolymer slurry containing fly ash, slag, micro fly ash and anhydrous sodium metasilicate cured for one day before mixing enhances the concrete's quality and complies with the flowability requirements. Assessment is based on the fresh and hardened properties of the SCGC with various RCA contents and coating periods. The fresh properties of the mix with a seven-day curing time for coated RCA did not meet the requirements for self-compacting concrete, while this mix demonstrated better compressive strength (31.61 MPa) and modulus of elasticity (15.39 GPa) compared to 29.36 MPa and 9.8 GPa, respectively, for the mix with one-day cured coated RCA. However, incorporating one-day-cured coated RCA in SCGC demonstrated better splitting tensile strength (2.32 MPa) and water absorption (15.16%).

A potential limitation of this study on SCGC with coated RCAs is the focus on the short-term behaviour of this concrete. This limited time frame may not meet the long-term requirements for ensuring the sustained durability of the structures throughout their service life.

This paper highlights the treatment technique of coating RCA with geopolymer slurry for casting SCGC.

The purpose of this paper on the one hand is to reduce the sintering temperature, shorten the sintering time and improve the electrical properties of the sample through the two-step flash sintering method and on the other hand is to study the effect of electric field on the phase structure, microstructure and electrical properties of the flash sintering sample.

In this paper, (Mg_1/3Ta_2/3)_0.01Ti_0.99O₂ giant dielectric ceramics were prepared by conventional sintering and two-step flash sintering, respectively. Further, the effect of electric field (600–750 V/cm) on the electrical properties of (Mg_1/3Ta_2/3)_0.01Ti_0.99O₂ giant dielectric ceramics was studied.

The results show that compared with the conventional sintering, the sintering temperature of the two-step flash sintering can be reduced by 200°C and the sintering time can be shortened by 12 times. All sintered samples were single rutile TiO₂ structure. Compared with conventional sintering, two-step flash sintering samples have finer grain size. The two-step flash sintered sample has similar dielectric properties to the conventional sintered sample. The dielectric constant of flash sintered samples decreases with the increase of electric field. When the electric field is 700 V/cm, the ceramic sample has the optimal dielectric properties, where the dielectric constant is approximately 5.5 × 10³ and the dielectric loss is about 0.18 at 1 kHz. Impedance spectroscopy analysis shows that the excellent dielectric properties are attributed to the internal barrier layer capacitance model.

This paper not only provides a new method for the preparation of co-doped TiO₂ giant dielectric ceramics but also has great potential in greatly improving efficiency and saving energy.

Drawing on and extending the push-pull-mooring (PPM) framework, this paper aims to empirically explore the influencing mechanism of traveler switching intention from the hotel reservation platforms to the sharing accommodation platforms (SAPs).

This study adopts structural equation modeling to analyze the 543 responses collected among hotel reservation platforms and SAPs travelers.

The results support the positive effect of both push factors (e.g. dissatisfaction with product, service and information quality of hotels on the hotel reservation platform) and pull factors (e.g. price value, authenticity, interaction, home benefits and novelty of SAPs) on traveler switching intention. Except for the negative effect of switching cost, other mooring factors including prior switching experience and social influence positively affect traveler switching intention. The authors also found the switching cost negatively and prior switching experience positively moderated the push effects on traveler switching intention, while the social influence positively moderated the pull effects on traveler switching intention.

Recommendations of future SAP participation research to consider the competing platforms, the unique experiences of SAPs and mooring factors. Examining the factors of different sources is also useful for practitioners to better understand travelers’ demands and to improve the overall welfare of travelers.

This paper embraces an extended PPM framework to explore traveler switching intention in online travel platforms. Moreover, this paper provides unique insights into the switching behavior from the hotel reservation platforms to the SAPs.