Search results

The purpose of this study is to examine the perceptions and attitudes of arts and design faculty on teaching sustainability in higher education institutions in the USA.

Arts and design faculty from nine universities in the USA were approached for the study, using both closed and open-ended questions in a survey instrument. Descriptive statistics and content analysis were used to analyze the collected data.

Results related to arts and design faculty’s perception of sustainability showed high confidence in teaching sustainability but lower confidence in inspiring students to take action on sustainability issues. Faculty also perceived time, resources, knowledge and support as barriers to the integration of the topic into the curriculum. This study revealed that the faculty’s attitude toward sustainability demonstrated their recognition that sustainability should be at the core of their discipline and that they support its integration into courses.

This study is limited to arts and design faculty in higher education institutions in the USA. The results may not be generalizable to other fields or locations. In addition, the use of self-reported data may be subject to bias.

The findings of this study can inform the development of curriculum and pedagogy in arts and design sustainability education. It can also guide institutions in addressing the challenges and barriers related to incorporating sustainability into their curriculum.

Prioritizing sustainability education is crucial in addressing global climate change and related issues. Art and design educators’ perspectives on teaching sustainability can contribute to constructing a sustainable future for everyone.

This study provides insight into the perception and attitude of sustainability among arts and design faculty in higher education in the USA and highlights areas for improvement such as training and resources to better integrate sustainability into the curriculum.

The purpose of this study was to investigate and document existing lighting systems and lighting levels, to compare findings to the Illuminating Engineering Society (IES) lighting standards (Rodgers, 1998) and to make lighting recommendation for energy and cost savings.

Lighting examinations and field measurements were conducted at a large, existing Midwestern institutional food-service facility that has been continuously operational since 1976. Lighting levels of the dining room, checkout line, buffet, kitchen, storage room and conference room were measured and then compared to the IES lighting standards. Recommendations were then made for energy and cost savings.

The average light levels in the dining room, checkout line, buffet, storage room and conference room exceeded the industry-recommended light levels. The energy and cost savings were calculated for this study, and the energy- and cost-saving strategies recommended included delamping, replacing lamps and luminaires and installing occupancy sensors. If existing lighting can be updated in an energy- and cost-saving manner, institutional food-service facilities might be made appropriate through renovation, thus extending the life of these facilities.

This study has practical implications for the many existing institutional food service facilities in workplaces across the USA that could save energy and costs through renovated lighting systems.

This research constitutes an in situ case study, which gathered empirical lighting data at an existing institutional food-service facility and made recommendations for lighting renovations. Although lighting systems influence dining and kitchen environments, lighting has not always been fully considered in institutional food-service facilities.

Marketers use e-mail in new, potentially more informative, entertaining and lucrative ways – such as embedding video. The purpose of this paper is to examine consumer responses to audiovisual (i.e. text along with a short video) versus text-only messages in brand communication. Specifically, authors seek to uncover the efficacy of marketer-embedded video (vs text-only) in e-mail on the consumer's product interest, informativeness, perceived prestige, electronic word-of-mouth (e-WOM) intentions and willingness to pass the electronic message along digitally or on social media. With the dual coding theory and selective visual attention as theoretical guideposts, the intended contribution is a framework that can explain and predict advantages for multi-modal e-mail marketing communications.

Five hypotheses are tested experimentally with a one-factor experiment with two conditions (text-only vs audiovisual). The sample was 240 adult participants. Real brands (Audi and Apple) were used. For both brands, participants were randomly assigned to one of two conditions of the e-mail (i.e. audiovisual vs text-only). The stimuli are identical, with the exception of embedded video in the e-mail body. The videos are authentic brand videos, are approximately 50 s and use a product feature appeal. Participants’ pre-existing brand attitude was measured. Then, five dependent variables (product interest, informativeness, perceived prestige, e-WOM intentions and willingness to pass the electronic message along digitally or on social media) were considered with respect to consumer exposure to e-mail with video and text in the e-mail from the brand versus text-only e-mail from the brand.

The results supported the hypotheses that audiovisual messages (i.e. those with text and video) heighten informativeness, product interest, perceived prestige, intentions to spread e-WOM for a brand and willingness to pass along the e-mail along to friends and family when compared to text-only messages. These experimental findings from a one-factor experiment with two conditions (text-only vs audiovisual) are generally consistent for an American consumer technology brand Apple (iPhone) and a German luxury automobile brand Audi (S4). Hypotheses are supported for both brands (Apple and Audi), with the exception of product interest for Audi, which may be explained by the high price of a luxury automobile.

An implication here for the dual coding theory is that the theory may be extended to consider what happens after the consumer codes the information with both the verbal and the non-verbal subsystem. The finding of interest to information processing scholars is that a video accompanying text communication from a brand to a consumer has an advantage over text-only communication. Brands that communicate with multi-modal marketing communication have better outcomes in informativeness, brand prestige perceptions and intentions of online consumer behaviors, including positive e-WOM for the brand in general and willingness to pass the specific content along in digital and social media platforms. Consumers can become brand advocates by being more inclined to forward the e-mails with the product short video as well as the e-mail text.

Brand marketers should consider e-mail in an integrated brand promotion (IBP) campaign as a cost advantage; one of the reasons e-mail should have a solid place in the IBP toolkit is due to e-mail's relatively low cost. The main cost comes with administration and production of the video. As a managerial implication for advertisers, embedding ads of a short video format in e-mails is a way to be more effective than plain-text e-mails. Short videos in e-mails are a reasonable idea to include in an integrated marketing communications effort (plausibly due to information processing with both a verbal and a non-verbal system). Brands can use videos in e-mails to enhance informativeness regarding products to enhance product differentiation from competitors. Yet, it is important to raise caution with some concerning disadvantages potentially associated with e-mail marketing and video. The three areas of caution include potential issues of privacy, clutter and technical inhibitors.

Despite the fact that e-mail is one of the most heavily used communication tools in marketing, there is scarce literature on e-mail and branding. By brands evoking a degree of prestige with embedded videos, consumer willingness to become part of the marketing communications is enhanced, as their e-WOM and willingness to share the branded content increase.

The purpose of this study was to examine the process of a custom colored carpet prototype that utilized innovative and sustainable sampling techniques.

This study adapted the prototype design process of problem definition and research; creative exploration; and implementation by LaBat and Solowski. The stages of problem definition and research and creative exploration were conducted for this study. Since only a sample of the carpet tile was developed, the implementation stage was not applicable and was replaced with an deliberation stage. The deliberation process for sustainable sampling was based on the five major performance categories of the sustainable carpet assessment standard, NSF/ASNI 140-2007: Public Health and Environment; Energy and Energy Efficiency; Bio-based Content, Recycled Content, and Environmentally Preferable Materials; Manufacturing; and Reclamation and End of Life Management.

A third party's proprietary sustainable sampling system was employed to support experimentation with multiple colorway applications, while minimizing sample waste. A custom colored commercial carpet tile that reflects one university's unique color palette was developed in collaboration with a large carpet manufacturer.

The deliberation stage was not intended to measure or award the points for the five performance categories. Moreover, the researchers are not eligible to certify carpet products. The certifiers are reputable auditors such as Scientific Certification Systems, UL Environment and NSF International. Rather, the five major performance categories of NSF/ASNI 140-2007 were employed as the framework for discussion.

Although creating a custom-colored commercial carpet tile product was a laborious and time-consuming activity, consumers in today's society have begun to expect tailored products that meet their needs. Custom colorization provides for personalization and the support of established color palettes without the anticipated higher associated expenses incurred with a completely custom product. At universities, where the home team's colors are omnipresent and extremely meaningful to stakeholders, developing custom colored carpet tile is appropriate.

Sustainable sampling was effectively utilized to facilitate a custom colored carpet tile prototype. This study fills a gap in the current literature since it incorporates a case study of the design of a sustainable interior product. Previously, few studies have tracked the inception and development of a carpet product through its design phases.

The purpose of this study was to examine lighting systems at 77 laboratories located within one building to save energy and associated costs.

Field measurements of illumination were conducted and compared to lighting standards and industry recommendations.

For energy and cost saving, de-lamping all four-lamp luminaires down to two-lamp luminaires and installing occupancy sensors in all laboratories were recommended.

The research team’s project working hours and study period were limited. This study begins to fill the gap in the literature regarding lighting field studies.

By carefully considering light level recommendations, industry standards and installation budgets, existing facilities can install appropriate retrofits to save energy and money without sacrificing illumination levels. Recommended retrofits are anticipated to significantly curtail annual federal energy consumption practices at the labs.

The retrofits recommended in this study will reduce US federal government’s energy-related expenditures and greenhouse gas emissions in support of the 2010 Presidential Mandate. The proposed occupancy sensors are anticipated to compensate for humans’ failure to manually control lighting.

This field study adds value by documenting cost-effective methods to measure, record and manage laboratory lighting, and it calls for the implementation of social, economic and ecological interventions. The recommended retrofits will reduce US federal government’s energy-related expenditures and greenhouse gas emissions in support of the 2010 Presidential Mandate.

The purpose of this paper is to examine safety lighting at an existing US government facility.

Field measurements of exterior illumination were conducted at four building sites housing laboratories, offices and a cafeteria at night and the findings were compared to the industry recommendations, the Illuminating Engineering Society of North America (IES) safety lighting recommendations.

Laboratory, office and cafeteria building exteriors were classified as “high hazard” due to area wildlife, potentially dangerous equipment and chemicals, the threat of intruders, and uneven terrain. Some sites' existing light levels fell far below industry recommendations and others greatly exceeded recommendations. Most of the existing lighting was uneven, unsustainable, rendered colors poorly, produced glare and/or remained energized when no one was present.

This study is limited by the small number of sites and limited geographical area of the sites. Lighting field studies can improve user safety, save energy and reduce facilities' waste.

This study employs a relatively simple approach to examine safety lighting that facility managers could adapt for their own facilities to inform improvements.

The current lack of lighting field studies, safety lighting research and case studies regarding government facilities is addressed by contributions of this research.

The purpose of this paper is to examine how urban dwellers engage on an environmentally friendly lifestyle. A survey was conducted in the Klang Valley, Malaysia, to establish the sustainable lifestyle intentions of urban dwellers.

A survey was conducted to establish the sustainable lifestyle intentions of urban dwellers of the Klang Valley in Malaysia. Data collected were analysed using the Cronbach’s α reliability test, the factor analysis, and multiple regression analysis.

A sustainable lifestyle has to be environmentally friendly and conforms to the community’s livelihood. Attitude towards participation of environmentally friendly lifestyle, awareness towards preservation of resources, subjective norms to engage in an environmentally friendly lifestyle, perceived environmental control and government support were the key intentions of a sustainable lifestyle of urban dwellers.

The current lifestyle intentions of urban dwellers in the Klang Valley have yet to be fully transformed into lifestyle behaviours that are sustainable. The local government is not strict in implementing and enforcing an environmentally friendly lifestyle that is practical and sustainable. Other than relying on the existing non-profit organisation’s fortnightly collection of recyclables, the local government can refer to the UNEP’s four E’s to initiate an efficient and sustainable production behaviour that leads to a sustainable and healthy lifestyle.

The purpose of this paper is to identify, analyze and develop a model to measure the interactions among different factors of organizational readiness for change in service sector specific to healthcare organization. The total interpretive structural modeling (TISM)-based readiness for change is to build a theoretical framework to understand the mutual interactions among the factors and to identify the driving and dependence power of these factors.

TISM is used to identify factors that contribute to analyze the readiness state before starting a change implementation process in healthcare. Matrice d’Impacts croises-multiplication applique´ a classement analysis is used to find the driving and dependent factors of change in healthcare.

This paper identified 12 factors of readiness for change from literature review followed by expert interview to understand the inner connection of factors and study inner relationships. The result says that state of affairs, recent trends in healthcare sector, technology advancement and interdependence among departments are key factors for readiness of change.

This research mainly focused on readiness factors for change in the healthcare sector.

This study will be useful for researcher and practitioners to understand the readiness factors for change.

In this research work, TISM-based readiness for the change framework structural model has been proposed for healthcare organizations which is a new effort in the area of organizational change management in this sector.