Search results

The chapter reviews the structure and functional area of decision support systems (DSS) for managing complex social and economic systems (CES). Particular features of building DSS to regulate the labor market in the context and with regard to peculiarities of the rural population, including pensioners are reported. Analytical models are provided in the form of differential equations describing the laws of changing SES performances under study due to migration of the population. The application of cognitive approach to build an analytical subsystem of DSS is substantiated. The peculiarities of building DSS for environmental and economic management are shown.

Aiming at the problem that the transmission mechanism of the assembly error of the multi-stage rotor with saddle surface type is not clear, the purpose of this paper is to propose a deep belief network to realize the prediction of the coaxiality and perpendicularity of the multi-stage rotor.

First, the surface type of the aero-engine rotor is classified. The rotor surface profile sampling data is converted into image structure data, and a rotor surface type classifier based on convolutional neural network is established. Then, for the saddle surface rotor, a prediction model of coaxiality and perpendicularity based on deep belief network is established. To verify the effectiveness of the coaxiality and perpendicularity prediction method proposed in this paper, a multi-stage rotor coaxiality and perpendicularity assembly measurement experiment is carried out.

The results of this paper show that the accuracy rate of face type classification using convolutional neural network is 99%, which meets the requirements of subsequent assembly process. For the 80 sets of test samples, the average errors of the coaxiality and perpendicularity of the deep belief network prediction method are 0.1 and 1.6 µm, respectively.

Therefore, the method proposed in this paper can be used not only for rotor surface classification but also to guide the assembly of aero-engine multi-stage rotors.

In this paper, the standard Peridynamic Timoshenko beam model accounting for the shear deformation is chosen to describe the thick beam kinematics. Unfortunately, when applied to very thin beam structures, the standard Peridynamics (PD) encounters the shear locking phenomenon, leading to incorrect solutions.

PD differs from classical continuum mechanics and other nonlocal theories that do not involve spatial derivatives of the displacement field. PD is based on the integral equation instead of differential equations to handle discontinuities and other singularities.

The shear locking can be successfully alleviated using the developed selective integration method. In particular, this technique has been implemented in the standard PD, which allows an accurate result for a wide range of slenderness from very thin to thick (10 < L/t < 10³) structures. It can also accelerate the computational time for particular dynamic problems using fewer neighboring integration particles. Several numerical examples are solved to demonstrate the effectiveness of the proposed method for modeling beam structures.

The paper highlights the severe shear locking phenomenon in the Peridynamic Timoshenko beam available in the literature, especially for very thin structures. A new alternative for the alleviation of shear locking in the Peridynamic Timoshenko beam, using selective integration. Hence the developed Peridynamic Timoshenko beam model is effective for thin and thick structures. A new peridynamic formulation for the low-velocity impact beam models is presented and validated.

1. The paper highlights the severe shear locking phenomenon in the Peridynamic Timoshenko beam proposed in the literature, especially for very thin structures.

2. The developed Peridynamic Timoshenko beam model based on selective integration is effective for thin and thick structures.

3. A new peridynamic formulation for the low-velocity impact beam models is presented and validated.

The paper highlights the severe shear locking phenomenon in the Peridynamic Timoshenko beam proposed in the literature, especially for very thin structures.

The developed Peridynamic Timoshenko beam model based on selective integration is effective for thin and thick structures.

A new peridynamic formulation for the low-velocity impact beam models is presented and validated.

The purpose of this paper is to present eight local elasto‐plastic beam element formulations incorporated into the corotational framework for two‐noded three‐dimensional beams. These formulations capture the warping torsional effects of open cross‐sections and are suitable for the analysis of the nonlinear buckling and post‐buckling of thin‐walled frames with generic cross‐sections. The paper highlights the similarities and discrepancies between the different local element formulations. The primary goal of this study is to compare all the local element formulations in terms of accuracy, efficiency and CPU‐running time.

The definition of the corotational framework for a two‐noded three‐dimensional beam element is presented, based upon the works of Battini .The definitions of the local element kinematics and displacements shape functions are developed based on both Timoshenko and Bernoulli assumptions, and considering low‐order as well as higher‐order terms in the second‐order approximation of the Green‐Lagrange strains. Element forces interpolations and generalized stress resultant vectors are then presented for both mixed‐based Timoshenko and Bernoulli formulations. Subsequently, the local internal force vector and tangent stiffness matrix are derived using the principle of virtual work for displacement‐based elements and the two‐field Hellinger‐Reissner assumed stress variational principle for mixed‐based formulations, respectively. A full comparison and assessment of the different local element models are performed by means of several numerical examples.

In this study, it is shown that the higher order elements are more accurate than the low‐order ones, and that the use of the higher order mixed‐based Bernoulli element seems to require the least number of FEs to accurately model the structural behavior, and therefore allows some reduction of the CPU time compared to the other converged solutions; where a larger number of elements are needed to efficiently discretize the structure.

The paper reports computation times for each model in order to assess their relative efficiency. The effect of the numbers of Gauss points along the element length and within the cross‐section are also investigated.

Timoshenko deformation calculation theory is suited to open section beam, which is not suited to closed section beam due to the difference stress distribution between the open and the closed section beam. This study aims to modify the deflection formula for prestressed concrete hollow slab (closed section beam) based on the Timoshenko theory.

(1) The deflection curves of the prestressed concrete hollow slab beam were obtained under a single point force; (2) linear phases of the deflection values, which were calculated by Timoshenko theory and ABAQUS, were compared with the measured values; (3) a modified coefficient related to the loading location was obtained to modify the Timoshenko theoretical formula in calculating the deflection of the prestressed concrete hollow slab.

(1) There is a large difference between the calculated values and the measured values at 4.3 < a/H < 7.7, and the differences are between 24 and 33 percent; (2) the Timoshenko deflection formula has been modified to fit for the calculation of the prestressed concrete hollow slab. The mean of f/ft is 1.01, and the variation coefficient is 0.09 after modification. Therefore, the modified formula can be better applied in the deflection calculation of the prestressed concrete hollow slab.

The Timoshenko theory is the most classical theory, which is often used to calculate the deformation of beams. The modified deflection formula for prestressed concrete hollow slab based on the Timoshenko theory is reliable and convenient, which can help engineers to calculate the deflection for closed section beam quickly.

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

This study aims to perform dynamic response analysis of damaged rigid-frame bridges under multiple moving loads using analytical based transfer matrix method (TMM). The effects of crack depth, moving load velocity and damping on the dynamic response of the model are discussed. The dynamic amplifications are investigated for various damage scenarios in addition to displacement time-histories.

Timoshenko beam theory (TBT) and Rayleigh-Love bar theory (RLBT) are used for bending and axial vibrations, respectively. The cracks are modeled using rotational and extensional springs. The structure is simplified into an equivalent single degree of freedom (SDOF) system using exact mode shapes to perform forced vibration analysis according to moving load convoy.

The results are compared to experimental data from literature for different damaged beam under moving load scenarios where a good agreement is observed. The proposed approach is also verified using the results from previous studies for free vibration analysis of cracked frames as well as dynamic response of cracked beams subjected to moving load. The importance of using TBT and RLBT instead of Euler–Bernoulli beam theory (EBT) and classical bar theory (CBT) is revealed. The results show that peak dynamic response at mid-span of the beam is more sensitive to crack length when compared to moving load velocity and damping properties.

The combination of TMM and modal superposition is presented for dynamic response analysis of damaged rigid-frame bridges subjected to moving convoy loading. The effectiveness of transfer matrix formulations for the free vibration analysis of this model shows that proposed approach may be extended to free and forced vibration analysis of more complicated structures such as rigid-frame bridges supported by piles and having multiple cracks.

This paper aims to combine Eringen’s micromorphic and nonlocal theories and thus develop a comprehensive size-dependent beam model capable of capturing the effects of micro-rotational/stretch/shear degrees of freedom of material particles and nonlocality simultaneously.

To consider nonlocal influences, both integral (original) and differential versions of Eringen’s nonlocal theory are used. Accordingly, integral nonlocal-micromorphic and differential nonlocal-micromorphic beam models are formulated using matrix-vector relations, which are suitable for implementing in numerical approaches. A finite element (FE) formulation is also provided to solve the obtained equilibrium equations in the variational form. Timoshenko micro-/nano-beams with different boundary conditions are selected as the problem under study whose static bending is addressed.

It was shown that the paradox related to the clamped-free beam is resolved by the present integral nonlocal-micromorphic model. It was also indicated that the nonlocal effect captured by the integral model is more pronounced than that by its differential counterpart. Moreover, it was revealed that by the present approach, the softening and hardening effects, respectively, originated from the nonlocal and micromorphic theories can be considered simultaneously.

Developing a hybrid size-dependent Timoshenko beam model including micromorphic and nonlocal effects. Considering the nonlocal effect based on both Eringen’s integral and differential models proposing an FE approach to solve the bending problem, and resolving the paradox related to nanocantilever.

The dynamic characteristics prediction and frequency-modulation of pipeline was an important work for the design of aircraft hydraulic structure.

A complex pipeline was deemed as a combination of several segments of straight-pipe-element (SPE). The 3D vibration equations of each SPE were established in their local coordinate system based on Timoshenko-beam model and Euler-beam model, respectively. The dynamic-stiffness-matrixes were deduced from the dispersion relation of these equations. According to the complex pipeline layout in the global coordinate system, a multi dynamic stiffness matrixes assembling (MDSMA) algorithm was carried out to establish the characteristic equations of the whole complex pipeline. The MDSMA solutions were verified to be consistent with experimental results.

The MDSMA method based on Timoshenko-Beam model was more suitable for the short span aviation pipeline and the vibration at high frequency stage (>350 Hz). The layout affected the pipeline's in-plane stiffness and out-plane stiffness, for the Z-shaped pipe, each order natural mode took place on the ZP and NP alternately. Reasonable designs of bending position and bending radius were effective means for complex pipeline frequency-modulation.

A new dynamic modeling method of aircraft complex pipeline was proposed to obtain the influence of pipeline layout parameters on dynamic characteristics.