Search results

Fluorine materials have received the keen attention of many researchers because of their water repellency and low surface free energy. The purpose of this paper is to prepare self-crosslinking fluorocarbon polyacrylate latexes containing different fluorocarbon chain lengths by semi-continuous seeded emulsion polymerization technology.

Methyl methacrylate (MMA), butyl acrylate (BA), hydroxypropyl methacrylate (HPMA) and fluorine-containing monomers were used as main monomers. The fluorine-containing monomers included hexafluorobutyl methacrylate (HFMA), dodecafluoroheptyl methacrylate (DFMA) and trifluorooctyl methacrylate (TFMA). Potassium persulfate (KPS) was used as thermal decomposition initiator, non-ionic surfactant alkyl alcohol polyoxyethylene (25) ether (DNS-2500) and anionic surfactant sodium dodecylbenzene sulfonate (SDBS) as mixed emulsifier.

Through optimizing the reaction conditions, the uniform and stable latex is gained. The polymer of structure was characterized by Fourier transform infrared spectroscopy (FTIR). Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and contact angle (CA) were tested on latex films. The particle size and distribution range of emulsion were tested with nano particle size analyzer. After comprehensively comparing the latexes and films prepared by HFMA, DFMA and TFMA, the performance of DFMA monomer modified is better.

The self-crosslinking acrylic emulsion is prepared via semi-continuous seeded emulsion polymerization, which methyl methacrylate (MMA), butyl acrylate (BA), hydroxypropyl methacrylate (HPMA) and fluorine-containing monomers were used as main monomers. The fluorine-containing monomers were composed of hexafluorobutyl methacrylate (HFMA), dodecafluoroheptyl methacrylate (DFMA) and trifluorooctyl methacrylate (TFMA). Potassium persulfate (KPS) was used as thermal decomposition initiator, non-ionic surfactant alkyl alcohol polyoxyethylene (25) ether (DNS-2500) and anionic surfactant sodium dodecylbenzene sulfonate (SDBS) as mixed emulsifier. There are two main innovations. One is that the self-crosslinking acrylic emulsion is prepared successfully. The other is that the effects of monomers containing different fluorocarbon chain lengths on polyacrylate, such as monomer conversion rate, coagulation rate, mechanical stability, chemical stability, emulsion particle size and storage stability, are studied in detail.

Self-crosslinked long fluorocarbon acrylate polymer latex has good hydrophobic and oleophobicity, weather resistance, aging resistance, stability and other excellent properties, which make the polymer be widely used in coatings, dyes, adhesives and other products. The purpose of this study is to prepare self-crosslinked long fluorocarbon acrylate polymer latex via semi-continuous seeded emulsion technology and carry out comparative study on two different cross-linked monomers.

Methyl methacrylate (MMA) and butyl acrylate (BA) were used as the main monomers, dodecafluoroheptyl methacrylate (DFMA) as the fluoromonomer, hydroxypropyl methacrylate (HPMA) and N-methylol acrylamide (NMA) as cross-linked monomers, and 1-allyloxy-3–(4-nonylphenol)-2-propanol polyoxyethylene (10) ether (ANPEO10) and 1-allyloxy-3–(4-nonylphenol)-2-propanol polyoxyethylene (10) ether ammonium sulfate (DNS-86) as compound emulsifiers via the semicontinuous-seeded emulsion polymerization.

The properties of the polymer emulsions, which are prepared with two different cross-linked monomers, are compared and discussed, and it is concluded that HPMA is more suitable for the preparation of self-crosslinked polymer emulsions. The formula of the polymer latex is ANPEO10: DNS-86 = 1:1, and the mass ratio of the monomers used in the polymer is MMA: BA: DFMA: HPMA = 14.40:14.40:0.60:0.60.

Self-crosslinked long fluorocarbon acrylate polymer latex can be used in many fields such as coatings, dyes, adhesives and other products.

The self-crosslinked long fluorocarbon acrylate polymer latex is prepared by mixing the nonionic emulsifier ANPEO10 and the anionic emulsifier DNS-86 when potassium persulfate is used as the thermal decomposition initiator and the semicontinuous-seeded emulsion technology is adopted and the comparative study on two different cross-linked monomer is carried out, which is not reported in the open literatures.

At present, the conventional method of preparing cationic fluorinated acrylic latex is to emulsify copolymerised monomers with cationic surfactants. However, there has been a wide concern about using Gemini surfactants to prepare cationic polymer latex to improve its properties. The purpose of this paper was to focus on the synthesis of novel self-crosslinked cationic fluorinated acrylic latex (SCFAL), during which the copolymerised monomers were initiated with a water soluble azo initiator and emulsified with mixed surfactants of Gemini emulsifier and alkyl polyglycoside (APG).

The novel SCFAL was prepared successfully by the semi-continuous seeded emulsion polymerisation of butyl acrylate, methyl methacrylate, hexafluorobutyl methacrylate (HFMA) and hydroxy propyl methacrylate (HPMA) in aqueous medium.

The conversion is the maximum and the coagulation percentage the minimum when the amounts of emulsifier and initiator are 8 and 0.6 per cent, respectively. The average particle size of the latex is significantly reduced with the increase of the amount of emulsifiers used. However, the average particle size of the latex is increased with the increase of the amount of HPMA. The particle size of the latex is of a unimodal distribution, which means that the particle size was reasonably uniform. Contact angle is increased with the increase of the amount of the HFMA.

The novel SCFAL can be widely used as significant components in the field of coatings, leather, textile, paper, adhesives and so on.

SCFAL, which was emulsified with novel mixed surfactants of Gemini surfactant and APG, has been prepared successfully. Influences of amount of initiator, emulsifier, HPMA and HFMA on emulsion polymerisation and/or properties of novel latex are investigated in detail.

Silane cross-linkers have been used to strengthen the mechanical stabilities and friction resistance of plastic products. Therefore, the effect of silane cross-linkers on latex has been studied through preparing modified self-cross-linking long fluorocarbon polyacrylate latex. In this paper, nonionic surfactant alcohol ether glycoside (AEG1000) and anionic polymerizable surfactant 1-allyloxy-3-(4-nonylphenol)-2-propanol polyoxyethylene (10) ether ammonium sulfate (DNS-86) acted as mixed emulsifier and 3-(methacryloyloxy) propyltrimethoxysilane (KH-570) and bis (2-ethylhexyl) maleate (DOM) were used as functional monomers.

The modified acrylate polymer latex was synthesized through the semi-continuous seeded emulsion polymerization with methyl methacrylate (MMA), butyl acrylate (BA), dodecafluoroheptyl methacrylate (DFMA) and hydroxypropyl methacrylate (HPMA) as main monomers. Potassium persulfate (KPS) was applied to initiate polymerization reaction, nonionic surfactant AEG1000 and DNS-86 acted as emulsifier, KH-570 and DOM were used as functional monomers, respectively.

The optimum conditions of synthesizing the modified latex were the following. The mass ratio of monomers containing MMA, BA, DFMA, HPMA, KH-570 and DOM was 13.58:13.58:0.90:1.20:0.15:0.60, the usage of initiator KPS was 0.5% of the total weight of monomers and the amount of emulsifier was 7% of all monomers with AEG1000:DNS-86 = 1:1. The results indicated that the conversion of monomer was 99% and the coagulation was about 2.0%.

The resultant latex was modified silane cross-linker KH-570 and DOM, which positively affected the comprehensive properties of latex and its film. Apart from this, the novel mixed emulsifier was used to improve the size and distribution of latex particles and reduce environmental problems caused by the use of emulsifiers.

Fluorinated silicon polymers are expected to be adopted in specific coatings to afford outstanding advantages, such as high chemical and photochemical resistance, low surface tension and low refractive index. The modified acrylate resin is prepared via solution polymerization of fluorine and silicon monomers, acrylate monomers and other functional monomers. The purpose of this paper is that the fluorine and silicon monomers such as vinyltriethoxysilane (VTES) and hexafluorobutyl methacrylate (HFMA) and some cheap monomers such as styrene are used to prepare the cationic acrylic resin.

The fluorine and silicon modified cationic acrylic resin is prepared via solution polymerization technology, which uses butyl acrylate (BA), methyl methacrylate (MMA), styrene (St), HFMA, VTES, dimethylaminoethyl methacrylate (DMAEMA) and hydroxypropyl methacrylate (HPMA) as the co-polymerized monomers, propylene glycol monomethyl ether (PGME) as solvent and 2,2-Azo-bis-iso-butyronitrile (AIBN) as the initiator to create a resin to introduce the Si–O and C–F into the polymer chains. The cathodic electrodeposition (CED) coatings were prepared by mixing the synthetic resin and blocked isocyanate.

The influence of the amounts of HFMA and VETS on the resin and the resultant CED coatings is investigated in detail. The optimum amounts of HFMA and VETS are obtained, which is 7–8% and 4–5%, respectively. The hydrophobicity and the acid and alkaline resistance of the film are improved when VETS and HFMA are introduced to co-polymerize with other monomers.

The fluorine and silicon monomers such as VTES and HFMA and some cheap monomers such as styrene, which are used to prepare the cationic acrylic resin, are seldom reported in the open literature.

Presently, a wide range of polyurethane adhesives can be obtained using different kinds of polyols and isocyanates. However, the applied temperature of the polyurethane adhesive is not more than 80°C. The film of polyurethane adhesive will be softened and deformed when its applied temperature is more than 100°C. Thus, the mechanical property of the polyurethane adhesive is decreased clearly, which limits its further application. The purpose of the study is to improve the heat resistance of polyols, especially polyester polyols and its resultant polyurethane adhesives.

The more rigid benzene ring is introduced into the polyester polyols to improve the heat resistance of its resultant polyurethane adhesive.

The more rigid benzene ring has ben introduced into the polyester polyols and the heat resistance of its resultant polyurethane adhesive is improved.

The polyester polyols with more rigid benzene ring have been prepared successfully by the vacuum melting method when diethylene glycol, neopentyl glycol, 1,6-hexanediol, ethanediol, isophthalic acid, terephthalic acid, sebacic acid and adipic acid are used as raw materials and tetra-isopropyl titanate is adopted as the catalyst.

Motivated by the globally increasing concern over environmental protection, the interest of a large part of the scientific community focuses on the development of green surfactants aiming to replace traditional toxic surfactants-based alternatives. The purpose of this paper is to prepare acrylate copolymer latex modified with fluorine and silicone monomer, which is emulsified with the green surfactants of sodium rosinate and alkyl polyglycoside (APG).

A series of acrylic copolymer latexes containing fluorine–silicon have been prepared by semi-continuous seed emulsion polymerisation of mixed monomers of methyl methacrylate (MMA), butyl acrylate (BA), hexafluorobutylmethacrylate (HFMA) and vinyltriethoxysilane (VTES) and emulsified by green mixed surfactants of sodium rosinate and APG.

The optimum recipe of preparing the emulsion is as follows: the amount of emulsifiers is 6 per cent and the mass ratio of sodium rosinate to APG is 1:3. The amount of initiator is 0.4 per cent, and the amounts of the silicon monomer and fluorine monomer are 5 and 7 per cent, respectively. In comparison with the acrylate latex prepared without fluorine monomer and silicon monomer, the thermal stability and the water resistance of the film of the resultant latex clearly improved.

The acrylic copolymer latexes containing fluorine–silicon emulsified with green surfactants can be used in the coatings, adhesives, finishing agents and so on.

The acrylic copolymer latexes containing fluorine–silicon have been prepared by semi-continuous seed emulsion polymerisation. The green mixed surfactants of sodium rosinate and APG have been used as the emulsifiers to replace traditional toxic surfactants-based alternatives.

Fluorine and silicon materials have received the keen attention of many researchers because of their water repellency and low surface free energy. The purpose this study was to prepare vinyl acetate (VAc)-vinyl ester of neodecanoic acid (VeoVa 10) copolymer latex modified with fluorine and silicone monomer, which is emulsified with the novel surfactants of disodium laureth sulfosuccinate (MES) and octylphenol polyoxyethylene ether (OP-10).

A series of modified latices containing fluorine-silicon have been prepared by semi-continuous seeded emulsion polymerisation of mixed monomers of VAc, VeoVa10, hexafluorobutylmethacrylate (HFMA) and vinyltriethoxysilane (VTES) and emulsified by novel surfactants of MES and OP-10.

The optimum conditions for preparing the modified latex is as follows: the amount of the surfactant was 4.0 Wt.% and the mass ratio of the anionic and nonionic surfactant was 3:1; the dosage of initiator was 0.4 Wt.% and the mass ratio of the main monomer was 3:1; and the amounts of VTES and HFMA were 2.0 and 6.0 Wt.%, respectively. In comparison with the conventional latex, the hydrophobicity of latex film was improved further.

The modified p (VAC-VeoVa) latex is prepared via semi-continuous seeded emulsion polymerisation, which is emulsified with the novel mixed surfactants of MES and OP-10. There are two main innovations. One is that the novel p (VAC-VeoVa) latex containing fluorine-silicon is prepared successfully. The other is that the emulsifier is composed of the novel mixed surfactants of MES and OP-10.

Fluorine materials have received the keen attention of many researchers because of their water repellency and low surface free energy. The purpose of this paper is to prepare fluorine-containing soap-free acrylic emulsion, which sodium allyoxypropyl hydroxypropyl sulfonate (COPS-1) and anionic emulsifier sodium a-alkenyl sulfonate (a-AOS) were combined as polymerizable emulsifier, and undecylenic acid (UA) and dodecafluoroheptyl methacrylate(DFMA) were introduced as functional monomer.

The fluorinated polyacrylate emulsion was successfully prepared by semi-continuous seed emulsion polymerization, wherein the main monomers were methyl methacrylate (MMA) and butyl methacrylate (BA), and the initiator was potassium persulfate (KPS). Sodium alloxypropyl sulfonate (COPS-1) and an anionic emulsifier sodium a-alkenyl sulfonate (a-AOS) were compounded as a polymerizable emulsifier. Besides, undecylenic acid (UA) and dodecafluoroheptyl methacrylate (DFMA) were introduced as the functional monomers.

The optimum recipe of preparing the modified latex is as follows: the amount of emulsifier was 4%, the ratio of emulsifier (COPS-1: AOS) was 3: 1, and the content of initiator was 0.6%. In this case, the conversion rate of acrylic polymer emulsion was high and the polymerization stability was good. When the amount of monomer UA was 2% and the amount of DFMA was 4%, the overall performance of the emulsion was the best.

The fluorine-containing soap-free acrylic emulsion is prepared via semi-continuous seeded emulsion polymerisation, which sodium allyoxypropyl hydroxypropyl sulfonate (COPS-1) and anionic emulsifier sodium a-alkenyl sulfonate (a-AOS) were combined as polymerizable emulsifier, and undecylenic acid (UA) and dodecafluoroheptyl methacrylate (DFMA) were introduced as functional monomer. There are two main innovations. One is that the fluorine-containing soap-free acrylic emulsion is prepared successfully. The other is that the undecylenic acid is introduced as functional monomer.

There are three double bonds in the chemical structure of diallyl maleate. The purpose of this study is that the acrylate is modified with diallyl maleic anhydride to make the propionate resin present a spatial network structure, thereby improving the performance of the acrylate resin.

Methyl methacrylate (MMA) and butyl acrylate(BA) were used as were used as main monomers. Diallyl maleate (DAM) was used as crosslinking monomer and dodecafluoroheptyl methacrylate (DFMA) was used as fluoromonomer. Potassium persulfate (KPS) was used as thermal decomposition initiator, sodium lauryl sulfate (AS) and sodium dodecyl sulfonate (SDS) were used as anionic emulsifiers, and EFS-470 (Alkyl alcohol polyether type nonionic emulsifier) was a non-ionic emulsifier.

Through optimizing the reaction conditions, the uniform and stable latex is obtained. The polymer of structure was characterized by Fourier transform infrared spectroscopy (FTIR). Thermogravimetric analysis (TGA) and contact angle (CA) were tested on latex films. The particle size and distribution range of emulsion were tested with nano particle size analyzer.

The experimental results showed that the thermal decomposition temperature of the acrylic coating film increased by 20.56°C after modification. In addition, the effect of cross-linking density on the water contact angle of the fluorocarbon groups in DFMA when they migrate to the surface of the latex film during drying has been explored. The experimental results show that a higher degree of cross-linking will hinder the migration of fluorocarbon groups to the surface of the resin film.