Search results

The purpose of this paper is to generate nitrogen-containing groups in the cotton fabric surface via low-temperature nitrogen plasma as an eco-friendly physical/zero-effluent process. This was done for rendering cotton dye-able with Acid Blue 284, which in fact does not have any direct affinity to fix on it.

Dyeing characteristics of the samples such as color strength (K/S), fastness properties to light, rubbing and perspiration and durability, as well as tensile strength, elongation at break, whiteness, weight loss and wettability in addition to zeta potential of the dyed samples, were determined and compared with untreated fabric. Confirmation and characterization of the plasma-treated samples via chemical modifications and zeta potential was also studied using Fourier transform infrared spectroscopy (FTIR) and Malvern Zetasizer instrumental analysis.

The obtained results of the plasma-treated fabric reflect the following findings: FTIR results indicate the formation of nitrogen-containing groups on cotton fabrics; notable enhancement in the fabric wettability, zeta potential to more positive values and improvement in the dyeability and overall fastness properties of treated cotton fabrics in comparison with untreated fabric; the tensile strength, elongation at break, whiteness and weight % of the plasma treated fabrics are lower than that untreated one; and the durability of the plasma treated fabric decreased with increasing the number of washing cycles.

The novelty addressed here is rendering cotton fabrics dye-able with acid dye via the creation of new cationic nitrogen-containing groups on their surface via nitrogen plasma treatment as an eco-friendly and efficient tool with a physical/zero-effluent process.

Herein, this study aims to use our recently tailored and fully characterized poly acrylonitrile (AN)-starch nanoparticle graft copolymer having 60.1 graft yield percentage as a starting substrate for copper ions removal from wastewater effluent after chemical modification with hydroxyl amine via oximation reaction as a calorimetric sensor.

The calorimetric sensor batch technique was used to determine the resin's adsorption capacity, while atomic adsorption spectrometry was used to determine the residual copper ions concentration in the filtrate before and after adsorption. This was done to convert the copolymer's abundant nitrile groups into amidoxime groups, and the resulting poly (amidoxime) resin was used as a copper ion adsorbent. To validate the existence of amidoxime groups, the resin was qualitatively characterized using a rapid vanadium ion test and instrumentally using Fourier transform infrared spectroscopy spectra and scanning electron microscopy morphological analysis.

At pH 7, 400 ppm copper ions concentration and 0.25 g adsorbent at room temperature, the overall adsorption potential of poly (amidoxime) resin was found to be 115.2 mg/g. The process's adsorption, kinetics and isothermal analysis were examined using various variables such as pH, contact time, copper ion concentration and adsorbent dose. To pretend the adsorption kinetics, various kinetics models, including pseudo-first-order and pseudo-second-order, were applied to the experimental results. The kinetic analysis indicated that the pseudo-second-order rate equation promoted the development of the chemisorption phase better than the pseudo-first-order rate equation. In the case of isothermal investigations, a study of observed correlation coefficient (R²) values indicated that the Langmuir model outperformed the Freundlich model in terms of matching experimental data.

To the best of the author's information, there is no comprehensive study for copper ions removal from waste water effluent using the recently tailored and fully characterized poly (AN)-starch nanoparticle graft copolymer having 60.1 graft yield percentage as a starting substrate after chemical modification with hydroxyl amine via oximation reaction as a calorimetric sensor.

This study aims to explore the incorporation of starch nanoparticles (SNPs) in cross-linking formulation of cotton fabrics to see their impact on fabric performance like tensile strength, dry wrinkle recovery angles, elongation at break, degree of whiteness and increase in weight as well as durability.

SNPs of size around 80-100 nm were successfully prepared from native maize starch by Nano precipitation technique and confirmed instrumentally by scanning electron microscope (SEM), transmittance electron microscope (TEM), Fourier transformer infrared (FTIR) spectroscopy and particle size analyzer. The latter were incorporated in cross-linking formulation of cotton fabrics encompassing different concentrations of citric acid and sodium hypophosphite at different curing time and temperature in 100 ml distilled water to a wet pickup of ca. 85 per cent. The fabric samples were dried for 3 min at 85°C and cured at specified temperatures for a specified time intervals in thermo fixing oven according to pad-dry-cure method.

FTIR spectra and SEM micrograph signified the chemical structure and surface morphology of cotton fabric before and after finishing in absence and presence of SNPs. Cotton fabric samples finished in presence of SNPs showed a higher tensile strength, elongation at break, comparable dry wrinkle recovery angles and degree of whiteness than that finished in their absence. On the other hand, the enhancement in the aforementioned performance reflects the positive impact of incorporation of SNPs in textile finishing especially with strength properties; which are one of the important requirements for industrial fabrics that can be used widely in heavy-duty applications.

SNPs with its booming effect with respect to biodegradability, reactivity and higher surface area can be used as a novel reinforcement permanent finish for cotton fabrics instead of more hazardous materials likes poly acrylate and monomeric compounds.

As SNPs biopolymers is one of the important reinforcement agents, so it was expected that it would minimize the great loss in strength properties during easy-care cotton finishing and improve the fabric performance.

The novelty addressed here is undertaken with a view to remediate some of the serious defects of easy-care cotton fabrics using poly carboxylic acids; especially with the great loss in strength properties by virtue of using SNPs as a permanent finish. Besides, to the authors’ knowledge, there is no published work so far concerning the use of SNPs as an innovative base for production of easy-care finished cotton textiles with high performance.