Search results

Surgical robot systems have been used in single-port laparoscopy (SPL) surgery to improve patient outcomes. This study aims to develop a vision robot system for SPL surgery to effectively improve the visualization of surgical robot systems for relatively complex surgical procedures.

In this paper, a new master-slave magnetic anchoring vision robotic system for SPL surgery was proposed. A lighting distribution analysis for the imaging unit of the vision robot was carried out to guarantee illumination uniformity in the workspace during SPL surgery. Moreover, cleaning force for the lens of the camera was measured to assess safety for an abdominal wall, and performance assessment of the system was performed.

Extensive experimental results for illumination, control, cleaning force and functionality test have indicated that the proposed system has an excellent performance in providing the visual feedback.

The main contribution of this paper lies in the development of a magnetic anchoring vision robot system that successfully improves the ability of cleaning the lens and avoiding the blind area in a field of view.

The grasping task of robots in dense cluttered scenes from a single-view has not been solved perfectly, and there is still a problem of low grasping success rate. This study aims to propose an end-to-end grasp generation method to solve this problem.

A new grasp representation method is proposed, which cleverly uses the normal vector of the table surface to derive the grasp baseline vectors, and maps the grasps to the pointed points (PP), so that there is no need to add orthogonal constraints between vectors when using a neural network to predict rotation matrixes of grasps.

Experimental results show that the proposed method is beneficial to the training of the neural network, and the model trained on synthetic data set can also have high grasping success rate and completion rate in real-world tasks.

The main contribution of this paper is that the authors propose a new grasp representation method, which maps the 6-DoF grasps to a PP and an angle related to the tabletop normal vector, thereby eliminating the need to add orthogonal constraints between vectors when directly predicting grasps using neural networks. The proposed method can generate hundreds of grasps covering the whole surface in about 0.3 s. The experimental results show that the proposed method has obvious superiority compared with other methods.

One of the development trends of robots is to enable robots to have the ability of anthropomorphic manipulation. Grasping is the first step of manipulation. For mobile manipulator robots, grasping a target during the movement process is extremely challenging, which requires the robots to make rapid motion planning for arms under uncertain dynamic disturbances. However, there are many situations require robots to grasp a target quickly while they move, such as emergency rescue. The purpose of this paper is to propose a method for target dynamic grasping during the movement of a robot.

An off-line learning from demonstrations method is applied to learn a basic reach model for arm and a motion model for fingers. An on-line dynamic adjustment method of arm speed for active and passive grasping mode is designed.

The experimental results of the robot movement on flat, slope and speed bumps ground show that the proposed method can effectively solve the problem of fast planning under uncertain disturbances caused by robot movement. The method performs well in the task of target dynamic grasping during the robot movement.

The main contribution of this paper is to propose a method to solve the problem of rapid motion planning of the robot arm under uncertain disturbances while the robot is grasping a target in the process of robot movement. The proposed method significantly improves the grasping efficiency of the robot in emergency situations. Experimental results show that the proposed method can effectively solve the problem.

The purpose of this paper is to propose a novel jump control method based on Two Mass Spring Damp Inverted Pendulum (TMS-DIP) model, which makes the third generation of hydraulic driven wheel-legged robot prototype (WLR-3P) achieve stable jumping.

First, according to the configuration of the WLR, a TMS-DIP model is proposed to simplify the dynamic model of the robot. Then the jumping process is divided into four stages: thrust, ascent, descent and compression, and each stage is modeled and solved independently based on TMS-DIP model. Through WLR-3P kinematics, the trajectory of the upper and lower centroids of the TMS-DIP model can be mapped to the joint space of the robot. The corresponding control strategies are proposed for jumping height, landing buffer, jumping attitude and robotic balance, so as to realize the stable jump control of the WLR.

The TMS-DIP model proposed in this paper can simplify the WLR dynamic model and provide a simple and effective tool for the jumping trajectory planning of the robot. The proposed approach is suitable for hydraulic WLR jumping control. The performance of the proposed wheel-legged jump method was verified by experiments on WLR-3P.

This work provides an effective model (TMS-DIP) for the jump control of WLR-3P. The results showed that the number of landing shock (twice) and the pitch angle fluctuation range (0.44 rad) of center of mass of the jump control method based on TMS-DIP model are smaller than those based on spring-loaded inverted pendulum model. Therefore, the TMS-DIP model makes the jumping process of WLR more stable and gentler.

This paper aims to propose a method to solve the problem of localization and mapping of a two-wheeled inverted pendulum (TWIP) robot on the ground using the Stereo–inertial measurement unit (IMU) system. This method reparametrizes the pose according to the motion characteristics of TWIP and considers the impact of uneven ground on vision and IMU, which is more adaptable to the real environment.

When TWIP moves, it is constrained by the ground and swings back and forth to maintain balance. Therefore, the authors parameterize the robot pose as SE(2) pose plus pitch according to the motion characteristics of TWIP. However, the authors do not omit disturbances in other directions but perform error modeling, which is integrated into the visual constraints and IMU pre-integration constraints as an error term. Finally, the authors analyze the influence of the error term on the vision and IMU constraints during the optimization process. Compared to traditional algorithms, the algorithm is simpler and better adapt to the real environment.

The results of indoor and outdoor experiments show that, for the TWIP robot, the method has better positioning accuracy and robustness compared with the state-of-the-art.

The algorithm in this paper is proposed for the localization and mapping of a TWIP robot. Different from the traditional positioning method on SE(3), this paper parameterizes the robot pose as SE(2) pose plus pitch according to the motion of TWIP and the motion disturbances in other directions are integrated into visual constraints and IMU pre-integration constraints as error terms, which simplifies the optimization parameters, better adapts to the real environment and improves the accuracy of positioning.

This paper aims to present a pipeline to progressively deal with the online external parameter calibration and estimator initialization of the Stereo-inertial measurement unit (IMU) system, which does not require any prior information and is suitable for system initialization in a variety of environments.

Before calibration and initialization, a modified stereo tracking method is adopted to obtain a motion pose, which provides prerequisites for the next three steps. Firstly, the authors align the pose obtained with the IMU measurements and linearly calculate the rough external parameters and gravity vector to provide initial values for the next optimization. Secondly, the authors fix the pose obtained by the vision and restore the external and inertial parameters of the system by optimizing the pre-integration of the IMU. Thirdly, the result of the previous step is used to perform visual-inertial joint optimization to further refine the external and inertial parameters.

The results of public data set experiments and actual experiments show that this method has better accuracy and robustness compared with the state of-the-art.

This method improves the accuracy of external parameters calibration and initialization and prevents the system from falling into a local minimum. Different from the traditional method of solving inertial navigation parameters separately, in this paper, all inertial navigation parameters are solved at one time, and the results of the previous step are used as the seed for the next optimization, and gradually solve the external inertial navigation parameters from coarse to fine, which avoids falling into a local minimum, reduces the number of iterations during optimization and improves the efficiency of the system.

Whole building life cycle assessment (WBLCA) is a key methodology to reduce the environmental impacts in the building sector. Research studies usually face challenges in presenting comprehensive LCA results due to the complexity of assessments at the building level. There is a dearth of methods for the systematic evaluation and optimization of the WBLCA performance at the design stage. The study aims to develop a design optimization framework based on the proposed WBLCA method to evaluate and improve the environmental performance at the building level.

The WBLCA development method is proposed with detailed processes based on the EN 15978 standard. The environmental product declaration (EPD) methods were adopted to ensure the WBLCA is comprehensive and reliable. Building information modeling (BIM) was used to ensure the building materials and assembly contributions are accurate and provide dynamic material updates for the design optimization framework. Furthermore, the interactive BIM-LCA calculation processes were demonstrated for measuring the environmental impacts of design upgrades. The TOPSIS-based LCA results normalization was selected to conduct the comparisons of various building design upgrades.

The case study conducted for a residential building showed that the material embodied impacts and the operational energy use impacts are the two critical factors that contribute 60–90% of the total environmental impacts and resource uses. Concrete and wood are the main material types accounting for an average of 65% of the material embodied impacts. The air and water heating for the house are the main energy factors, as these account for over 80% of the operational energy use. Based on the original WBLCA results, two scenarios were established to improve building performance through the design optimization framework.

The LCA results show that the two upgraded building designs create an average of 5% reduction compared with the original building design and improving the thermal performance of the house with more insulation materials does not always reduce the WBLCA results. The proposed WBLCA method can be used to compare the building-level environmental performances with the similar building types. The proposed framework can be used to support building designers to effectively improve the WBLCA performance.

To propose a new investment-income valuation model by real options approach (ROA) for old community renewal (OCR) projects, which could help the government attract private capital's participation.

The new model is proposed by identifying the types of options private capital has in the OCR project, selecting the option model most suitable for private capital investment decisions, improving the valuation model through the triangular fuzzy numbers to take into account the uncertainty and flexibility, and demonstrating the feasibility of the calculation model through an actual OCR project case.

The new model can valuate OCR projects more accurately based on considering uncertainty and flexibility, compared with conventional methods that often underestimate the value of OCR projects.

The investment-income of OCR projects shall be re-valuated from the lens of real options, which could help reveal more real benefits beyond the capital growth of OCR projects, enable the government to attract private capital's investment in OCR, and alleviate government fiscal pressure.

The proposed OCR-oriented investment-income valuation model systematically analyzes the applicability of real option value (ROV) to OCR projects, innovatively integrates the ROV and the net present value (NPV) as expanded net present value (ENPV), and accurately evaluate real benefits in comparison with existing models. Furthermore, the newly proposed model holds the potential to be transferred to various social welfare projects as a tool to attract private capital's participation.

The purpose of this paper is to improve control performance and safety of a real two-wheeled inverted pendulum (TWIP) robot by dealing with model uncertainty and motion restriction simultaneously, which can be extended to other TWIP robotic systems.

The inequality of lumped model uncertainty boundary is derived from original TWIP dynamics. Several motion restriction conditions are derived considering zero dynamics, centripedal force, ground friction condition, posture stability, control torque limitation and so on. Sliding-mode control (SMC) and model predictive control (MPC) are separately adopted to design controllers for longitudinal and rotational motion, while taking model uncertainty into account. The reference value of the moving velocity and acceleration, delivered to the designed controller, should be restricted in a specified range, limited by motion restrictions, to keep safe.

The cancelation of model uncertainty commonly existing in real system can improve control performance. The motion commands play an important role in maintaining safety and reliability of TWIP, which can be ensured by the proposed motion restriction to avoid potential movement failure, such as slipping, lateral tipping over because of turning and large fluctuation of body.

An inequation of lumped model uncertainty boundary incorporating comprehensive errors and uncertainties of system is derived and elaborately calculated to determine the switching coefficients of SMC. The motion restrictions for TWIP robot moving in 3D are derived and used to impose constraints on reference trajectory to avoid possible instability or failure of movement.

This study aims to investigate the influence and impact mechanism of capital tax incentives on firm innovation.

This study employs the difference-in-differences (DID) method, in conjunction with the exogenous impact of accelerated depreciation (AD) pilot policy. This study selects Chinese listed companies from 2010 to 2017 as the research sample.

Firstly, AD exerts a substantial positive effect on the quantity and quality of the innovation output of firms, and the positive impact results primarily from heightened investment in fixed assets, particularly, machinery and equipment. Secondly, the influence of the policy is pronounced in non-state-owned enterprises, mature enterprises, less capital-intensive enterprises and non-high-tech industries, which all exhibit strong innovation incentives. Lastly, the tax incentive policy significantly stimulates firm innovation in the short term, but its long-term impact on innovation incentives lacks statistical significance.

This study highlights the significance of capital tax incentives in facilitating the innovation process in firms.