Search results

Calcium and Zinc lignates were proven to be good antioxidants for rubber composites. The purpose of this paper is to evaluate the copper lignate antioxidant activity along with evaluating its electrical conductivity in rubber composites.

The antioxidant activity of the Cu-LSF complex was compared with that of standard commercial antioxidant additives as a green alternative. The rheological characteristics, thermal aging and mechanical and electrical properties were evaluated for the NBR vulcanizates containing the different antioxidants in the presence or absence of coupling agents.

Results revealed that the Cu-LSF complex (5 phr) can function as a compatibilizing, antioxidant and electrical conductivity agent.

The new copper complex prepared from paper-pulping black liquor of wastes could be used as a green antioxidant and electrical conductivity agent in rubber composites.

In continuation to the previous work on copper (lignin/silica/fatty acids) (Cu-LSF) complex as a natural antioxidant/electrical conductivity agent for nitrile-butadiene rubber (NBR), this study aims to perform further investigations for NBR vulcanizates loaded with different concentrations of Cu-LSF complex, including swelling behavior and hardness properties, as well as evaluating their thermal stability via thermogravimetric analysis.

The behavior of Cu-LSF complex in NBR matrix was compared with that of the standard commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline/N-isopropyl-N′-phenyl-p-phenylenediamine [TMQ/IPPD]).

Results revealed that Cu-LSF complex can act as an effective reinforcing and hardening agent, with exhibiting fluid resistance, even when compared with the commercial antioxidants. In comparison with the previous studies on its Zn and Ca analogues and their behavior in different rubber matrixes, Cu-LSF complex showed higher values of hardness and less susceptibility for swelling, respectively. Moreover, Cu-LSF antioxidant activity becomes in accordance with the previous work.

The new Cu-LSF complex could be used as a green alternative to the commercial antioxidants (TMQ/IPPD) with introducing further advantages to the rubber matrix, such as hardening, fluid resistance and thermal stability.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

The purpose of this paper is to study the efficiency of lignin/silica and calcium lignate/calcium silicate as natural antioxidants in styrene-butadiene rubber (SBR) vulcanizates.

It has been found that thermal aging data of the aged sample revealed that SBR vulcanizate undergoes crosslink reactions that lead to embrittlement and ultimately failure. Incorporation of lignin/silica or calcium lignate/calcium silicate, however, resulted in significant improvement of the degradation profile of the vulcanizates at 90±1°C. Loss of tensile strength and flexibility during aging of the SBR compounds with 8 phr lignin/silica or calcium lignate/calcium silicate was mild relative to unfilled polymer, indicating a restricted degradation due to the presence of the investigated compounds. The results obtained revealed that the investigated compounds are good antioxidant, and the evaluation was confirmed by physico-mechanical properties of the vulcanizates, FT-IR spectroscopy, transmission (TEM) and scanning (SEM) electron microscope.

It was noticed that SBR vulcanizates having 8 phr of lignin/silica or calcium lignate/calcium silicate exhibited the best mechanical properties in comparison with other concentrations (1, 2, 4, 6 and 10 phr). Also, results revealed that the lignin/silica derivatives are efficient antioxidants in SBR vulcanizates compared to vulcanizates containing conventional antioxidants used in rubber industry, namely polymerized 2,2,4-trimethyl-1, 2-dihydroquinoline (TMQ), and N-isopropyl-N'-phenyl-P-phenylenediamine (IPPD).

All these results indicated that lignin/silica and calcium lignate/calcium silicate in SBR had good heat resistance and aging resistance, calcium lignate/calcium silicate has an application limitation as not all vulcanizates need to use CaCO₃/calcium salts.

Lignin is usually seen as a waste product of pulp and paper industry and is often used as fuel for the energy balance of the pulping process. It is simple isolation along with silica from rice straw and using it as an antioxidant added further practical utility for this waste.

The importance of lignin/silica derivatives is arisen from their biodegradability and their ease availability from rice straw black liquor.

The purpose of this paper is to study the effect of new heterocyclic compounds on styrene butadiene rubber (SBR) mixes.

It has been found that the starting material 1 could react with cyromazine (2) and/or 4‐aminoantipyriene (4) as amino compounds in the presence of triethylorthoformate and in the boiling dioxane to yield triazine‐3 and/or pyrazolo 5 derivatives, respectively. The chemical structures of the new products 3 and 5 have been established by their elemental analyses spectroscopic data IR, Ms and 1H, 13C NMR. These two compounds were evaluated as antioxidants in SBR, and this evaluation was confirmed by physico‐mechanical properties of vulcanizates, IR spectra and scanning electron microscope.

The difference between maximum torque MH and minimum torque ML (ΔM), tensile strength, modulus and elongation at break increases in the presence of prepared antioxidants while the equilibrium swelling decreased. The rubber vulcanizates were subjected to thermal oxidative aging at 90°C for up to seven days. It has been found that new compounds 3 and 5 can protect SBR vulcanizates against oxidative deterioration.

The solubility of the prepared compounds 3 and 5 is very poor and they are only soluble in dimethyl formamide (DMF) or dimethyl sulphoxide (DMSO) which have high boiling points. Also, new compounds 3 and 5 have melting points (above 300°C).

Triazine and antipyrine derivatives have many medical and industrial applications.

The new synthesized compounds revealed excellent antioxidant behaviour in comparison with the commercial antioxidant phenyl‐β‐naphthyl amine (PβN) which is used in industry.

The synthesis and chemistry of nitrogen heterocyclic azo compounds have been extensively studied. Many derivatives of this type were proved to be excellent dyes. Presents a systematic and comprehensive survey of all recently synthesised nitrogen heterocyclic azo dyes according to dyeing methods.

This paper aims to synthesize some new heterocyclic disperse azo dyes and their application in dyeing of polyester and polyamide fabrics.

Pyrazolopyrimidine derivatives containing arylazo function by the reaction of 3,5‐ diaminopyrazole with ketene dithioacetals were prepared. The prepared dyestuffs are established using elemental analysis, IR measurements, ¹H‐NMR and Mass spectra.

2,5‐diamino‐3‐arylazo‐N‐aryl‐6‐carboxamide‐7‐methylthio‐pyrazolo[1,5‐a]pyrimidine have been synthesized by the simple method. The dyed fabrics have a very good (4‐5) to excellent (5) results toward washing, perspiration, and rubbing fastness properties. The dyes are superior in terms of preparation and fastness properties.

The disperse azo dyes used in this paper were synthesized via a step‐wise pathway leading to the new azo dyes. In addition, the variations in substituents and sites of location on the heterocyclic moiety could also be studied.

The new azo dye systems based on substituted pyrazolopyrimidine provided a series of azo dyes with improved dyeing properties. The dyes are superior in terms of yield, purity, colour strength, and fastness properties and will lead to valuable achievements for commercial production.

The synthesized disperse azo dyes are superior in terms of preparation, yield, purity, and fastness properties.