Search results
1 – 8 of 8Kang Min, Fenglei Ni, Guojun Zhang, Xin Shu and Hong Liu
The purpose of this paper is to propose a smooth double-spline interpolation method for six-degree-of-freedom rotational robot manipulators, achieving the global C2 continuity of…
Abstract
Purpose
The purpose of this paper is to propose a smooth double-spline interpolation method for six-degree-of-freedom rotational robot manipulators, achieving the global C2 continuity of the robot trajectory.
Design/methodology/approach
This paper presents a smooth double-spline interpolation method, achieving the global C2 continuity of the robot trajectory. The tool center positions and quaternion orientations are first fitted by a cubic B-spline curve and a quartic-polynomial-based quaternion spline curve, respectively. Then, a parameter synchronization model is proposed to realize the synchronous and smooth movement of the robot along the double spline curves. Finally, an extra u-s function is used to record the relationship between the B-spline parameter and its arc length parameter, which may reduce the feed rate fluctuation in interpolation. The seven segments jerk-limited feed rate profile is used to generate motion commands for algorithm validation.
Findings
The simulation and experimental results demonstrate that the proposed method is effective and can generate the global C2-continuity robot trajectory.
Originality/value
The main contributions of this paper are as follows: guarantee the C2 continuity of the position path and quaternion orientation path simultaneously; provide a parameter synchronization model to realize the synchronous and smooth movement of the robot along the double spline curves; and add an extra u-s function to realize arc length parameterization of the B-spline path, which may reduce the feed rate fluctuation in interpolation.
Details
Keywords
Xinyang Fan, Xin Shu, Baoxu Tu, Changyuan Liu, Fenglei Ni and Zainan Jiang
In the current teleoperation system of humanoid robots, the control between arms and the control between the waist and arms are individual and lack coordinated motion. This paper…
Abstract
Purpose
In the current teleoperation system of humanoid robots, the control between arms and the control between the waist and arms are individual and lack coordinated motion. This paper aims to solve the above problem and proposes a teleoperation control approach for a humanoid robot based on waist–arm coordination (WAC).
Design/methodology/approach
The teleoperation approach based on WAC comprises dual-arm coordination (DAC) and WAC. The DAC method realizes the coordinated motion of both arms through one hand by establishing a mapping relationship between a single hand controller and the manipulated object; the WAC method realizes the coordinated motion of both arms and waist by calculating the inverse kinematic input of robotic arms based on the desired velocity of the waist and the end of both arms. An integrated teleoperation control framework provides interfaces for the above methods, and users can switch control modes online to adapt to different tasks.
Findings
After conducting experiments on the dual-arm humanoid robot through the teleoperation control framework, it was found that the DAC method can save 27.2% of the operation time and reduce 99.9% of the posture change of the manipulated object compared with the commonly used individual control. The WAC method can accomplish a task that cannot be done by individual control. The experiments proved the improvement of both methods in terms of operation efficiency, operation stability and operation capability compared with individual control.
Originality/value
The DAC method better maintains the constraints of both arms and the manipulated object. The WAC method better maintains the constraints of the manipulated object itself. Meanwhile, the teleoperation framework integrates the proposed methods and enriches the teleoperation modes and control means.
Details
Keywords
Fenglei Ni, Tianhui Li, Yiwei Liu, Hong Liu, Yang Li, Liangliang Zhao and Zhaopeng Chen
The purpose of this paper is to study the dynamic modeling and controller design for the series element actuator (SEA) joints. The robot equipped with SEA joints is a strong…
Abstract
Purpose
The purpose of this paper is to study the dynamic modeling and controller design for the series element actuator (SEA) joints. The robot equipped with SEA joints is a strong coupling, nonlinear, highly flexible system, which can prevent itself from damaging by the accidental impact and the people to be injured by the robot.
Design/methodology/approach
Based on the torque source model, the authors built a dynamic model for the SEA joint. To improve the accuracy of this model, the authors designed an elastic element into the joint and implemented the vector control for the joint motor. A control method of combined PD controller and back-stepping was proposed. Moreover, the torque control could be transformed into position control by stiffness transformation.
Findings
The established model and the proposed method are verified by the position and torque control experiments. The experimental results show that the dynamic model of the SEA joint is accurate and the proposed control strategies for the SEA joint are reasonable and feasible.
Originality/value
The main contribution of the paper is as follows: designing an elastic element with high linearity to improve the model accuracy of the SEA joint. The control strategy-based back-stepping method for the SEA joint is proposed to increase the robustness of the controller.
Details
Keywords
Baoxu Tu, Yuanfei Zhang, Kang Min, Fenglei Ni and Minghe Jin
This paper aims to estimate contact location from sparse and high-dimensional soft tactile array sensor data using the tactile image. The authors used three feature extraction…
Abstract
Purpose
This paper aims to estimate contact location from sparse and high-dimensional soft tactile array sensor data using the tactile image. The authors used three feature extraction methods: handcrafted features, convolutional features and autoencoder features. Subsequently, these features were mapped to contact locations through a contact location regression network. Finally, the network performance was evaluated using spherical fittings of three different radii to further determine the optimal feature extraction method.
Design/methodology/approach
This paper aims to estimate contact location from sparse and high-dimensional soft tactile array sensor data using the tactile image.
Findings
This research indicates that data collected by probes can be used for contact localization. Introducing a batch normalization layer after the feature extraction stage significantly enhances the model’s generalization performance. Through qualitative and quantitative analyses, the authors conclude that convolutional methods can more accurately estimate contact locations.
Originality/value
The paper provides both qualitative and quantitative analyses of the performance of three contact localization methods across different datasets. To address the challenge of obtaining accurate contact locations in quantitative analysis, an indirect measurement metric is proposed.
Details
Keywords
Kang Min, Fenglei Ni and Hong Liu
The purpose of the paper is to propose an efficient and accurate force/torque (F/T) sensing method for the robotic wrist-mounted six-dimensional F/T sensor based on an excitation…
Abstract
Purpose
The purpose of the paper is to propose an efficient and accurate force/torque (F/T) sensing method for the robotic wrist-mounted six-dimensional F/T sensor based on an excitation trajectory.
Design/methodology/approach
This paper presents an efficient and accurate F/T sensing method based on an excitation trajectory. First, the dynamic identification model is established by comprehensively considering inertial forces/torques, sensor zero-drift values, robot base inclination errors and forces/torques caused by load gravity. Therefore, the sensing accuracy is improved. Then, the excitation trajectory with optimized poses is used for robot following and data acquisition. The data acquisition is not limited by poses and its time can be significantly shortened. Finally, the least squares method is used to identify parameters and sense contact forces/torques.
Findings
Experiments have been carried out on the self-developed robot manipulator. The results strongly demonstrate that the proposed approach is more efficient and accurate than the existing widely-adopted method. Furthermore, the data acquisition time can be shortened from more than 60 s to 3 s/20 s. Thus, the proposed approach is effective and suitable for fast-paced industrial applications.
Originality/value
The main contributions of this paper are as follows: the dynamic identification model is established by comprehensively considering inertial forces/torques, sensor zero-drift values, robot base inclination errors and forces/torques caused by load gravity; and the excitation trajectory with optimized poses is used for robot following and data acquisition.
Details
Keywords
Jun Wu, Fenglei Ni, Yuanfei Zhang, Shaowei Fan, Qi Zhang, Jiayuan Lu and Hong Liu
This paper aims to present a smooth transition adaptive hybrid impedance control for compliant connector assembly.
Abstract
Purpose
This paper aims to present a smooth transition adaptive hybrid impedance control for compliant connector assembly.
Design/methodology/approach
The dynamics of the manipulator is firstly presented with linear property. The controller used in connector assembly is inspired by human operation habits in similar tasks. The hybrid impedance control is adopted to apply force in the assembly direction and provide compliance in rest directions. The reference trajectory is implemented with an adaptive controller. Event-based switching strategy is conducted for a smooth transition from unconstrained to constrained space.
Findings
The method can ensure both ideal compliance behaviour with dynamic uncertainty and a smooth transition from unconstrained to constrained space. Also, the method can ensure compliant connector assembly with a good tolerance to the target estimation error.
Practical implications
The method can be applied in the connector assembly by “pushing” operation. The controller devotes efforts on force tracking and smooth transition, having potential applications in contact tasks in delicate environment.
Originality/value
As far as the authors know, the paper is original in providing a uniform controller for improving force and position control performance in both unconstrained and constrained space with dynamic uncertainty. The proposed controller can ensure a smooth transition by only adjusting parameters.
Details
Keywords
Yiwei Liu, Shipeng Cui, Hong Liu, Minghe Jin, Fenglei Ni, Zhiqi Li and Chongyang Li
The purpose of this study is to develop a robotic hand–arm system for on-orbit servicing missions at the Tiangong-2 (TG-2) Space Laboratory.
Abstract
Purpose
The purpose of this study is to develop a robotic hand–arm system for on-orbit servicing missions at the Tiangong-2 (TG-2) Space Laboratory.
Design/methodology/approach
The hand–arm system is mainly composed of a lightweight arm, a dexterous hand, an electrical cabinet, a global camera, a hand–eye camera and some human–machine interfaces. The 6-DOF lightweight arm and the 15-DOF dexterous hand adopt the modular design philosophy that greatly reduces the design cycle and cost. To reduce the computational burden on the central controller and simplify system maintenance, an electrical system which has a hierarchical structure is introduced.
Findings
The prototypical operating experiments completed in TG-2 space laboratory demonstrate the performance of the hand–arm system and lay foundations for the future applications of space manipulators.
Originality/value
The main contributions of this paper are as follows a robotic hand–arm system which can perform on-orbit servicing missions such as grasping the electric drill, screwing the bolt, unscrewing J599 electrical connector has been developed; a variable time step motion plan method is proposed to adjust the trajectories of the lightweight arm to reduce or eliminate the collision force; and a dexterous hand uses the coordinated grasp control based on the object Cartesian stiffness to realize stable grasp. To solve the kinematic mapping from the cyber glove commands to the dexterous hand, a fingertip-position-based method is proposed to acquire precise solutions.
Details
Keywords
Guojun Zhang, Fenglei Ni, Hong Liu, Zainan Jiang, Guocai Yang and Chongyang Li
The purpose of this paper is to transfer the impedance regulation of manual belt grinding to robot belt grinding control.
Abstract
Purpose
The purpose of this paper is to transfer the impedance regulation of manual belt grinding to robot belt grinding control.
Design/methodology/approach
This paper presents a novel methodology for transmitting human impedance regulation skills to robot control in robot belt grinding. First, according to the human grinding experimental data, the skilled worker’s arm impedance regulation is calculated. Next, the human skills are encapsulated as the statistical learning model where the kernel parameters are learned from the demonstration data by Gaussian process regression (GPR) algorithms. The desired profiles of robot are generated by the task planner based on the learned skill knowledge model. Lastly, the learned skill knowledge model is integrated with an adaptive hybrid position-force controller over the trajectory and force of end-effector in robot belt grinding task.
Findings
Manual grinding skills are represented and transferred to robot belt grinding for higher grinding quality of the workpiece.
Originality/value
The impedance of the manual grinding is estimated by k-means++ algorithm at different grinding phases. Manual grinding skills (e.g. trajectory, impedance regulation) are represented and modeled by GMM and GPR algorithms. The desired trajectory, force and impedance of robot are generated by the planner based on the learned skills knowledge model. An adaptive hybrid position-force controller is designed based on learned skill knowledge model. This paper proposes a torque-tracking controller to suppress the vibration in robot belt grinding process.
Details