Search results

THE applications of advanced fibre reinforced composite materials for the manufacture of lightweight stable components have rapidly expanded in the aerospace and other industries in recent years. Typically, these components are produced from woven fabrics or unidirectional tapes of carbon, aramid or glass fibre, preimpregnated with partially cured or ‘B‐staged’ epoxy resins. Layers of this ‘prepreg’ material are laid onto a mould tool to form the component which is then cured in an autoclave at temperatures around 180°C under a consolidating pressure of 1001bf/in2.

This chapter explores the role of ethics in shaping, underpinning and sustaining authentic leadership. Viewing ethics as a system of moral principles that govern individual behaviour and conduct, Mould discusses the basis of ethics for authentic leadership, recognising that it has multiple overlapping and conflicting sources. Recognising the multiple ‘moral’ pressures and dilemmas that leaders face, Mould asks how they can construct and live by coherent ethics in a globally minded, interconnected, culturally diverse and often incoherent world. He suggests tools that may assist in searching for ethics that support authentic leadership. The author concludes that examining the interplay between ethics and leadership practices challenges theories of authentic leadership.

Application of the numerical method to the art of Medicine was regarded not as a “trivial ingenuity” but “an important stage in its development”; thus proclaimed Professor Bradford Hill, accepted as the father of medical statistics, a study still largely unintelligible to the mass of medical practitioners. The need for Statistics is the elucidation of the effects of multiple causes; this represents the essence of the statistical method and is most commendable. Conclusions reached empirically under statistical scrutiny have mistakes and fallacies exposed. Numerical methods of analysis, the mathematical approach, reveals data relating to factors in an investigation, which might be missed in empirical observation, and by means of a figure states their significance in the whole. A simplified example is the numerical analysis of food poisoning, which alone determines the commonest causative organisms, the commonest food vehicles and the organisms which affect different foods, as well as changes in the pattern, e.g., the rising incidence of S. agona and the increase of turkey (and the occasions on which it is served, such as Christmas parties), as a food poisoning vehicle. The information data enables preventive measures to be taken. The ever‐widening fields of Medicine literally teem with such situations, where complexities are unravelled and the true significance of the many factors are established. Almost every sphere of human activity can be similarly measured. Apart from errors of sampling, problems seem fewer and controversy less with technical methods of analysis then on the presentation and interpretation of figures, or as Bradford Hill states “on the application of common sense and on elementary rules of logic”.

The purpose of this paper is to explore how British print media have reported the emergence of food banks in the UK.

The research uses the news database Nexis and focuses on the period since the global financial crisis in 2007 in nine national UK print media titles. The search criteria included mention of the term food bank at least three times in the newspaper article and a UK focus. This resulted in 190 usable articles from the newspapers.

There were no UK-focused newspaper articles before 2008 and few until 2012 when the number increased dramatically. A key theme in reporting was increasing numbers of food banks and users of them. The data most often cited were from the Christian charity The Trussell Trust which runs a franchise system of food banks. There were clusters of newspaper articles indicating a common source. Few of the articles used direct quotes from current food bank users. A “frame contest” appeared in 2013/early 2014 with newspaper articles reporting both changes in welfare provision and the proliferation of food banks as the reason for the increase in food banks and food bank use. Tensions emerged between three key sets of players: government ministers, church leaders and The Trussell Trust as the key provider of food banks in England.

The authors only examined newspapers, the reporting in other media may be different.

The media reporting of food poverty and the use of food banks has the potential to influence public perceptions and policy.

This is the first study to look at how food banks are reported by the media.

Nano‐imprint forming (NIF) is a manufacturing technology capable of achieving high resolution, low‐cost and high‐throughput fabrication of fine nano‐scale structures and patterns. The purpose of this paper is to use modelling technologies to simulate key process steps associated with the formation of patterns with sub‐micrometer dimensions and use the results to define design rules for optimal imprint forming process.

The effect of a number of process and pattern‐related parameters on the quality of the fabricated nano‐structures is studied using non‐linear finite element analysis. The deformation process of the formable material during the mould pressing step is modelled using contact analysis with large deformations and temperature dependent hyperelastic material behaviour. Finite element analysis with contact interfaces between the mould and the formable material is utilised to study the formation of mechanical, thermal and friction stresses in the pattern.

The imprint pressure, temperature and the aspect ratio of grooves which define the pattern have significant effect on the quality of the formed structures. The optimal imprint pressure for the studied PMMA is identified. It is found that the degree of the mould pattern fulfilment as function of the imprint pressure is non‐linear. Critical values for thermal mismatch difference in the CTE between the mould and the substrate causing thermally induced stresses during cooling stage are evaluated. Regions of high stresses in the pattern are also identified.

Design rules for minimising the risk of defects such as cracks and shape imperfections commonly observed in NIF‐fabricated nano‐structures are presented. The modelling approach can be used to provide insights into the optimal imprint process control. This can help to establish further the technology as a viable route for fabrication of nano‐scale structures and patterns.

This paper presents results from the testing and benchmarking of a slip cast 316 stainless steel injection moulding tool. A brief out line of the slip casting process and the test cavity geometry is given as well as a discussion of some of the commercial alternative methods of forming injection moulding cavities. The calculations for the slip cast test cavity cost and lead time are given and comparisons between slip casting tool formation and alternative methods are made. The paper concludes that the slip casting method has potential in replacing some of the other tooling methods.

The purpose of this paper is to report on the use of a combination of indirect selective laser sintering (SLS) and machining processes to create injection mould tools, an approach designed to offer the capability to create conformal cooling channels in the core/cavity inserts together with the levels of surface finish and accuracy required to meet typical injection mould tool specifications.

The research has been pursued through three industrial case studies. In each study, existing injection mold inserts have been redesigned to give a conformally cooled tool. These have then been manufactured using indirect SLS, high‐speed machining, electro‐discharge machining and polishing. The inserts have been evaluated in industrial trials to assess their performance in terms of cycle time, energy usage, durability and quality. The insights gained from the three case studies have then been developed into a series of design rules, which may be applied in the development of tooling for new applications.

The results show that significant productivity improvements and energy use reductions in injection moulding are possible through the implementation of conformal cooling, and that the material has sufficient wear resistance to be used in production applications. However, it is recommended that modelling is always used to understand the impact of conformal cooling channels, and manufacture is carefully planned to ensure that the required internal geometry is created.

The paper presents new results on the impact of conformal cooling on the productivity and energy efficiency of injection moulding, and on the durability of the indirect SLS material in injection moulding applications. A novel “cut‐out volume” technique for powder clearing is also presented, along with a set of design rules to support further application of the work.

Government appointed and sponsored committees of every description—select, ad hoc, advisory, inquiry—such a prominent feature of the public scene since the last War, are understandable, even acceptable, reflect the urgency of the times in which we live. In the gathering gloom of more recent twilight years, they have flourished inordinately, especially in the socio‐political field, where most of their researches have been conducted. Usually embellished with the name of the figure‐head chairman, almost always expensively financed, they have one thing in common—an enormous output of words, telling us much of what we already know. So much of it seems dull, meaningless jargon, reflecting attitudes rather than sound, general principles.

The findings of the Steering Group on Food Freshness in relation to the compulsory date marking of food contained in their Report, reviewed elsewhere in this issue, has brought within measurable distance the Regulations which were, in any case, promised for1975. The Group consider that the extension of voluntary open date marking systems will not be sufficiently rapid (or sufficiently comprehensive) to avoid the need or justify the delay in introducing legislation.